BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE KUNDLI

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 [email protected]

Scope List

Reset

30 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

460000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	20000	-
4(Construction requirements)	-	15000	-
5(Polymeric materials)	-	45000	-
6(Internal wiring and current-carrying parts)	-	45000	-
7(Connections)	-	95000	-
8(Bonding and grounding)	-	35000	-
9(Creepage and clearance distances)	-	35000	-
10(Field wiring compartments with covers)	-	60000	-
11(Marking)	-	15000	-
12()	-	45500	-

Complete

23 Jun, 2022

-
-

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	9000		-
5.2(Message Readability)	-	9000		-

Complete

23 Jun, 2022

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	NA
1.6(Power interface .)	-	1000	NA
1.7(Markings and instructions)	-	1000	NA
2.1(Protection from electric shock and energy hazards)	-	8000	NA
2.2(SELV circuits)	-	3000	NA
2.3(TNV circuits)	-	7000	NA
2.4(Limited current circuits)	-	1000	NA
2.5(Limited power sources .)	-	1000	NA
2.6(Provisions for earthing and bonding)	-	5000	NA
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	NA
2.8(Safety interlocks)	-	6500	NA
2.9(Electrical insulation)	-	5000	NA
2.10(Clearances, creepage distances and distances through insulation)	-	16000	NA
3.1(General)	-	5000	NA
3.2(Connection to a mains supply)	-	6000	NA
3.3(Wiring terminals for connection of external conductors)	-	4000	NA
3.4(Disconnection from the mains supply)	-	500	NA
3.5(Interconnection of equipment)	-	500	NA
4.1(Stability)	-	2000	NA
4.2(Mechanical strength)	-	7500	NA
4.3(Design and construction)	-	6000	NA
4.4(Protection against hazardous moving parts)	-	500	NA
4.5(Thermal requirements)	-	3000	NA
4.6(Openings in enclosures)	-	3500	NA
4.7(Resistance to fire)	-	4000	NA
5.1(Touch current and protective conductor curren)	-	1000	NA
5.2(Electric strength)	-	1000	NA
5.3(Abnormal operating and fault conditions)	-	3500	NA
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	500	NA
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	NA
6.3(Protection of the telecommunication wiring system from overheating)	-	500	NA
7.1(General)	-	500	NA
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	NA
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	NA
7.4(Insulation between primary circuits and cable distribution systems)	-	3000	NA

Complete

23 Jun, 2022

-
-

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs.85000/-for cells Rs 78000/- for Batteries

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Jun, 2022

-
Cl. 8.3.8 transport test : Based on manufacturer`s documents to demonstrate compliance Upto 10 Ah for Batteries and upto 8A for charging current only

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	500	-
31.0(Resistance To Rusting)	-	1000	-
30.0(Resistance To Heat and Fire)	-	500	-
29.0(Creepage Distances and Clearances)	-	500	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
24.0(Components)	-	1000	-
23.0(Internal Wiring)	-	750	-
22.0(Construction)	-	750	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	1500	-
14.0(Transient Overvoltage)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
11.0(Heating)	-	1500	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	500	-
7.0(Classification)	-	500	-
6.0(Marking and Instructions)	-	500	-

Complete

23 Jun, 2022

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	NA
6(Hazardous radiations)	-	1000	NA
7(Heating under normal operating conditions)	-	14000	NA
8(Constructional requirements with regard to the protection against electric shock)	-	7000	NA
9(Electric shock hazard under normal operating conditions)	-	5000	NA
10(Insulation requirements)	-	15000	NA
11(Fault conditions)	-	8000	NA
12(Mechanical strength)	-	15000	NA
13(CLEARANCES and CREEPAGE DISTANCES)	-	7000	NA
14(Components)	-	0	NA
15(TERMINALS)	-	8000	NA
16(External flexible cords)	-	8000	NA
17(Electrical connections and mechanical fixings)	-	6000	NA
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	2000	NA
19(Stability and mechanical hazards)	-	7000	NA
20(Resistance to fire)	-	7000	NA

Complete

23 Jun, 2022

-
-

IS 4283 (1981)

Withdrawal

- View breakup
Rs.18540/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Jun, 2022

-
-

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	125	-
6(Classification- IS 302-1)	-	125	-
7.1(Marking- IS 302-1)	-	43	-
7.1(Marking- IS 302-1)	-	43	-
7.1(Marking- IS 302-1)	-	43	-
7.1(Marking- IS 302-1)	-	43	-
7.3(Marking- IS 302-1)	-	43	-
7.4(Marking- IS 302-1)	-	43	-
7.6(Marking- IS 302-1)	-	43	-
7.11(Marking- IS 302-1)	-	43	-
7.12(Marking- IS 302-1)	-	43	-
7.13(Marking- IS 302-1)	-	43	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	43	-
7.101(Marking)	-	43	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	750	-
11(Heating, IS 302-1)	-	166	-
11(Heating, IS 302-1)	-	166	-
11(Heating, IS 302-1)	-	166	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	750	-
15.3(Moisture Resistance, IS 302-1)	-	750	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	750	-
19.2(Abnormal Operation, IS 302-1)	-	437	-
19.2(Abnormal Operation, IS 302-1)	-	437	-
19.3(Abnormal Operation, IS 302-1)	-	437	-
19.3(Abnormal Operation, IS 302-1)	-	437	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	750	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
22.103(Construction)	-	100	-
22.104(Construction)	-	100	-
22.105(Construction)	-	100	-
22.105.1(Construction)	-	100	-
22.105.2(Construction)	-	100	-
22.106(Construction)	-	100	-
22.107(Construction)	-	100	-
11.107.1(Construction)	-	166	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
24.1(Components, IS 302-1)	-	250	-
24.2(Components, IS 302-1)	-	250	-
24.101(Components)	-	250	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.4(Supply Connection and External Flexible Cords)	-	171	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	375	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	250	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	171	-
26(Terminals for External Conductors, IS 302-1)	-	375	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	750	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	750	-
31(Resistance of Rusting, IS 302-1)	-	750	-
7.1(Marking- IS 302-1)	-	43	-
7.1(Marking- IS 302-1)	-	43	-
7.1(Marking- IS 302-1)	-	43	-
7.1(Marking- IS 302-1)	-	43	-
11(Heating, IS 302-1)	-	166	-
11(Heating, IS 302-1)	-	166	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	750	-

Complete

23 Jun, 2022

-
-

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

18250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.21.103(Mechanical Strength.)	-	62	-
Cl.6 (Classification)	-	250	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7(Marking and Instructions)	-	6	-
Cl.7(Marking and Instructions)	-	6	-
Cl.7(Marking and Instructions)	-	6	-
Cl.7.3(Marking and Instructions)	-	6	-
Cl.7.3(Marking and Instructions)	-	6	-
Cl.7.3(Marking and Instructions)	-	6	-
Cl.7.4(Marking and Instructions)	-	6	-
Cl.7.5(Marking and Instructions)	-	6	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	6	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	6	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	6	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	6	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	6	-
Cl.7.14(Marking and Instructions)	-	6	-
Cl.7.14(Marking and Instructions)	-	6	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	6	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	6	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	6	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	6	-
Cl.7.101(Marking and Instructions)	-	6	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	250	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	250	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11.8(Heating)	-	57	-
Cl.11.8(Heating)	-	57	-
Cl.11.8(Heating)	-	57	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	375	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	375	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	750	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	375	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	375	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	1500	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	16	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	16	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	16	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	16	-
Cl.19.101(Abnormal Operation.)	-	16	-
Cl.19.102(Abnormal Operation.)	-	16	-
Cl.19.103(Abnormal Operation.)	-	16	-
Cl.19.104(Abnormal Operation.)	-	16	-
Cl.19.105(Abnormal Operation.)	-	16	-
Cl.19.106(Abnormal Operation.)	-	16	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	16	-
Cl.19.107(Abnormal Operation.)	-	16	-
Cl.19.108(Abnormal Operation.)	-	16	-
Cl.19.109(Abnormal Operation.)	-	16	-
Cl.19.110(Abnormal Operation.)	-	16	-
Cl.19.111(Abnormal Operation.)	-	16	-
Cl.19.112(Abnormal Operation.)	-	16	-
Cl.19.113(Abnormal Operation.)	-	16	-
Cl.19.114(Abnormal Operation.)	-	16	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	250	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	62	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	62	-
Cl.21.101 (Mechanical Strength.)	-	62	-
Cl.21.102(Mechanical Strength.)	-	62	-
Cl.22.1 of IS 302-1:2008(Construction)	-	19	-
Cl.22.5 of IS 302-1:2008(Construction)	-	19	-
Cl.22.6 of IS 302-1:2008(Construction)	-	19	-
Cl.22.7 of IS 302-1:2008(Construction)	-	19	-
Cl.22.8 of IS 302-1:2008(Construction)	-	19	-
Cl.22.9 of IS 302-1:2008(Construction)	-	19	-
Cl.22.11(Construction)	-	19	-
Cl.22.12 of IS 302-1:2008(Construction)	-	19	-
Cl.22.13 of IS 302-1:2008(Construction)	-	19	-
Cl.22.14 of IS 302-1:2008(Construction)	-	19	-
Cl.22.15 of IS 302-1:2008(Construction)	-	19	-
Cl.22.18 of IS 302-1:2008(Construction)	-	19	-
Cl.22.20 of IS 302-1:2008(Construction)	-	19	-
Cl.22.21 of IS 302-1:2008(Construction)	-	19	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	71	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	71	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	71	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	71	-
Cl.24.1 of 302-1:2008(Component)	-	50	-
Cl.24.1 of 302-1:2008(Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
Cl.24.1.3 (Component)	-	50	-
C.24.2 of 302-1:2008(Component)	-	50	-
Cl.24.10(Component)	-	50	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	16	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	16	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	16	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	125	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	125	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	125	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	125	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	125	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	250	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	125	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	125	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	187	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	187	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	250	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	6	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
C.24.1.4(Component)	-	50	-
C.23.7 of 302-1:2008(Internal Wiring )	-	71	-
Cl.6 (Classification)	-	250	-
Cl.11 & IS:302-1:2008(Heating)	-	57	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	125	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	250	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	187	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	187	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	125	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	125	-
Cl.24 of IS:302-2-30:2007(Component)	-	50	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	71	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	19	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	19	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	19	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	19	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	19	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	19	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	19	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	19	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	19	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	19	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	19	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	19	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	62	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	62	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	62	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	250	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	16	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	16	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	16	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	16	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	16	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	16	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	16	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	16	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	16	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	16	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	16	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	375	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	375	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	500	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	750	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	375	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	375	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	57	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	250	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	250	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	6	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	6	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	6	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	6	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	6	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	6	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	6	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	6	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	6	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	6	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	6	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	6	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	6	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	6	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	57	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	57	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	57	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	57	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	57	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	57	-

Complete

23 Jun, 2022

-
-

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

28750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-30:2007(Classification)	-	250	-
Cl.6 of IS 302-2-30:2007(Classification)	-	250	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	8	-
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008(Power Input and Current)	-	500	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	8	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	58	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	750	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	750	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	375	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	375	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	375	-
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	375	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	750	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	750	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	750	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	750	-
Cl.18 of IS 302-2-30:2007 (Endurance)	-	1500	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	20	-
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	100	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	100	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	100	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	100	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	100	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	36	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	100	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	100	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	100	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	100	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	100	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	50	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	38	-
Cl.26 of IS 302-2-30:2007 &IS:302-1:2008(Terminal for External Conductors)	-	500	-
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	250	-
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	250	-
Cl.28 of IS 302-2-30:2007 &IS:302-1:2008(Screws and Connections)	-	500	-
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	250	-
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	250	-
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	375	-
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	375	-
Cl.31 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Rusting)	-	500	-
Cl.7 of IS 369:2019(Dimensions)	-	334	-
Cl.7 of IS 369:2019(Dimensions)	-	334	-
Cl.7 of IS 369:2019(Dimensions)	-	334	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	500	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	500	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	500	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	250	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	250	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	250	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	250	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	250	-
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	500	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	125	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	125	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	125	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	125	-
Cl.12 of IS 369:2019(Set-back)	-	1500	-
Cl.14 of IS 369:2019(Inrush current)	-	2000	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	333	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	333	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	333	-
Cl.16 of IS 369:2019(Usable power)	-	1000	-

Complete

23 Jun, 2022

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.6 of IS 302-2-35:2017(Classification)	-	125	-
Cl.6 of IS 302-2-35:2017(Classification)	-	125	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	250	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	250	-
Cl.11 of 302-2-35:2017(Heating)	-	107	-
Cl.11 of 302-2-35:2017(Heating)	-	107	-
Cl.11 of 302-2-35:2017(Heating)	-	107	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	187	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	750	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	333	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	333	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	375	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	375	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	1500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	50	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	50	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	50	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	50	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	375	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	125	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	125	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	31	-
Cl.24 of IS 302-2-35:2017(Component )	-	83	-
Cl.24 of IS 302-2-35:2017(Component )	-	83	-
Cl.24 of IS 302-2-35:2017(Component )	-	83	-
Cl.24 of IS 302-2-35:2017(Component )	-	83	-
Cl.24 of IS 302-2-35:2017(Component )	-	83	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	250	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	100	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	100	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	100	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	250	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	250	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	1000	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	3000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	2500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.7 of IS 302-2-35:2017(Marking)	-	6	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	187	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.22 of IS 302-2-35-2011(Construction )	-	9	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	250	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	250	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	100	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	100	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	250	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	62	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	62	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	41	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	28	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	28	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	28	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	28	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	28	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	28	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	28	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	28	-
Cl.24 of IS 302-2-35:2017(Component )	-	83	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	83	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	83	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	9	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	9	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	9	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	9	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	9	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	9	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	9	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	9	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	9	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	9	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	9	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	9	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	9	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	9	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	9	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	9	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	9	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	9	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	9	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	9	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	125	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	125	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	375	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	50	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	50	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	50	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	375	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	375	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	333	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	750	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	187	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	187	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	107	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	107	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	107	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	250	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	250	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	6	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	6	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	6	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	6	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	6	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	6	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	6	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	6	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	6	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	6	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	6	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	6	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	6	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	6	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	6	-

Complete

23 Jun, 2022

-
-

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

23000 View breakup
Rs.20700/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	20	-
13.1 (a)(Marking)	-	20	-
13.1 (b)(Marking)	-	20	-
13.1 (c)(Marking)	-	20	-
13.1 (d)(Marking)	-	20	-
13.1 (e)(Marking)	-	20	-
13.1 (f)(Marking)	-	20	-
13.1 (g)(Marking)	-	20	-
13.1 (h)(Marking)	-	20	-
13.1 (j)(Marking)	-	20	-
13.2(Marking)	-	20	-
13.4(Marking)	-	20	-
3.1(Sizes )	-	100	-
4.1(Rated Voltage)	-	100	-
5.1(Rated frequency)	-	100	-
6.1(Design and General Construction)	-	45	-
6.3(Design and General Construction)	-	45	-
6.3(Design and General Construction)	-	45	-
6.4(Design and General Construction)	-	45	-
6.5(Design and General Construction)	-	45	-
6.6(Design and General Construction)	-	45	-
6.7(Design and General Construction)	-	45	-
6.9(Design and General Construction)	-	45	-
6.1(Design and General Construction)	-	45	-
6.11(Design and General Construction)	-	45	-
6.12(Design and General Construction)	-	45	-
7.1(Design and General Construction)	-	250	-
8.1(Design and General Construction)	-	250	-
9(Design and General Construction)	-	250	-
10.1(Starting )	-	250	-
11.1(Interchangeability)	-	250	-
14.2 & 15.1(Air Delivery)	-	2500	-
14.3.A(Temperature-Rise (for motors))	-	476	-
14.3(Temperature-Rise)	-	476	-
14.3(Temperature-Rise)	-	476	-
14.4(Moistureproofness (for regulators only))	-	476	-
14.3.B(Moistureproofness (for regulators only))	-	476	-
14.5(Mechanical Endurance (for regulators only))	-	476	-
14.1 & 14.6(Power factor)	-	285	-
14.7(ac leakage)	-	285	-
14.8(High voltage test)	-	285	-
14.9(Insulation-Resistance)	-	285	-
14.1(Earthing continuity)	-	300	-
14.11 & 15.1(Electrical Input)	-	300	-
14.12 & 16(Fan Speed)	-	300	-
14.3.A(Temperature-Rise (for motors))	-	476	-
14.3.A(Temperature-Rise (for motors))	-	476	-
14.3.B(Temperature-Rise (for regulators))	-	476	-
14.3.B(Temperature-Rise (for regulators))	-	476	-
6.5(Design and General Construction)	-	45	-
6.6(Design and General Construction)	-	45	-
6.1(Design and General Construction)	-	45	-
6.11(Design and General Construction)	-	45	-
6.12(Design and General Construction)	-	45	-
7.1(Design and General Construction)	-	250	-
8.1(Design and General Construction)	-	250	-
9(Design and General Construction)	-	250	-
10.1(Starting )	-	250	-
14.2 & 15.1(Air Delivery)	-	2500	-
14.3(Temperature-Rise)	-	476	-
14.3(Temperature-Rise)	-	476	-
14.3(Temperature-Rise)	-	476	-
14.3(Temperature-Rise)	-	476	-
14.3(Temperature-Rise)	-	476	-
14.4(Moistureproofness (for regulators only))	-	476	-
14.1 & 14.6(Power factor)	-	285	-

Complete

23 Jun, 2022

-
-

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
16.1(Marking and Diagram of connenctions)	-	28	-
10(Type of enclosures)	-	100	-
11(Methods of cooling)	-	100	-
9.1(General construction (as per Cl. 9 & F-3))	-	100	-
9(General construction (as per Cl. 9 & F-3))	-	100	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	100	-
9(General construction (as per Cl. 9 & F-3))	-	100	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	100	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	100	-
4.1(Rated Voltage)	-	100	-
4.2(Rated Frequency)	-	100	-
4.3(Rated Output)	-	100	-
4.4(Rated Speed)	-	100	-
9.5(Earthing)	-	100	-
9.5(Earthing)	-	100	-
9.5(Earthing)	-	100	-
17.3 (a)(No load test at rated voltage and frequency )	-	100	-
17.3 (a)(No load test at rated voltage and frequency)	-	100	-
17.3 (a)(No load test at rated voltage and frequency)	-	100	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	100	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	100	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	100	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	100	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	100	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	100	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	100	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	100	-
12.7(Insulation resistance test)	-	100	-
13.1(High voltage test)	-	1125	-
13.2(Moisture proofness)	-	1125	-
13.2(Moisture proofness)	-	1125	-
13.3(Leakage current test)	-	1125	-
12.6(Vibration Severity)	-	100	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	100	-
15.1.5(Noise Level)	-	100	-
15.2(Specific Requirements)	-	100	-
7(Dimensions (Cl.App.F-4))	-	125	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	100	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	100	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	100	-
10(Type of enclosures)	-	100	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	100	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	100	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	100	-
13.2(Moisture proofness)	-	1125	-
7.2(Dimensions)	-	125	-
17.4 & 9.4.6.1(Observation)	-	200	-
17.3 (k)(Current)	-	100	-
17.3 (m)(Vibration)	-	100	-
17.3 (h)(Voltage)	-	100	-
17.3 (b)(Temperature)	-	100	-
17.3 (e)(Temperature)	-	100	-
17.3 (c)(Current, Torque)	-	100	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	100	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	100	-

Complete

23 Jun, 2022

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	80	-
6(Classification- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.1(Marking- IS 302-1)	-	12	-
7.2(Marking)	-	12	-
7.4(Marking)	-	12	-
7.5(Marking)	-	12	-
7.6(Marking)	-	12	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
9(Starting, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	167	-
11(Heating, IS 302-1)	-	167	-
11(Heating, IS 302-1)	-	167	-
11(Heating, IS 302-1)	-	167	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	330	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	330	-
14(Transient Over Voltages, IS 302-1)	-	375	-
15(Moisture Resistance, IS 302-1)	-	250	-
15.1(Moisture Resistance, IS 302-1)	-	250	-
15.2(Moisture Resistance-Spillage test)	-	250	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	335	-
19(Abnormal Operation, IS 302-1)	-	200	-
19(Abnormal Operation, IS 302-1)	-	200	-
19(Abnormal Operation, IS 302-1)	-	200	-
19(Abnormal Operation, IS 302-1)	-	200	-
20(Stability & Mechanical Hazards, IS 302-1)	-	165	-
20(Stability & Mechanical Hazards, IS 302-1)	-	165	-
21(Mechanical Strength, IS 302-1)	-	330	-
21(Mechanical Strength, IS 302-1)	-	330	-
22.1(Construction)	-	100	-
22.2(Construction)	-	100	-
22.3(Construction)	-	100	-
22.4(Construction)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction)	-	100	-
22.8(Construction)	-	100	-
22.9(Construction)	-	100	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
23(Internal Wiring, IS 302-1)	-	45	-
24.1(Components, IS 302-1)	-	80	-
24.1(Components, IS 302-1)	-	80	-
24.1(Components, IS 302-1)	-	80	-
24.1(Components, IS 302-1)	-	80	-
24.2(Components)	-	80	-
24.4(Components)	-	80	-
24.5(Components)	-	80	-
24.6(Components)	-	80	-
24.7(Components)	-	80	-
24.8(Components)	-	80	-
24.9(Components)	-	80	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
26(Terminals for External Conductors, IS 302-1)	-	250	-
27(Provision for Earthing, IS 302-1)	-	165	-
27(Provision for Earthing, IS 302-1)	-	165	-
27(Provision for Earthing, IS 302-1)	-	165	-
27(Provision for Earthing, IS 302-1)	-	165	-
27(Provision for Earthing, IS 302-1)	-	165	-
28(Screws & Connections, IS 302-1)	-	500	-
29(Clearances and Distances through Insulation, IS 302-1)	-	335	-
29(Clearances and Distances through Insulation, IS 302-1)	-	335	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	335	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	335	-
31(Resistance of Rusting, IS 302-1)	-	500	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	22	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	22	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	22	-
34.3(Whisking egg whites )	-	22	-
34.4(IDLI batter-Grinding of rice)	-	22	-
34.4(IDLI batter-Grinding of black gram)	-	22	-
34.5.1 (a)(Operational test for juicers )	-	22	-
34.5.1 (b)(Operational test for juicers )	-	22	-
34.5.2(Operational test for juicers )	-	22	-
35(Temperature withstand test for bowl)	-	250	-
36(Test for controls )	-	125	-
37(Strength of Assembly )	-	85	-
37(Strength of Assembly )	-	85	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
34.4(IDLI batter-Grinding of rice)	-	22	-
Cl 35(Verification)	-	250	-
Cl 34(Verification)	-	22	-
Cl.32(Verification)	-	1000	-
Cl.30(Verification)	-	335	-
CL.29(Verification)	-	335	-
Cl.28(Verification)	-	500	-
Cl.27(Verification)	-	165	-
Cl.26(Verification)	-	250	-
Cl.24(Verification)	-	80	-
Cl.23(Verification)	-	45	-
Cl.21(Verification)	-	330	-
Cl.20(Verification)	-	165	-
Cl.19(Verification)	-	200	-
Cl.18(Verification)	-	13000	-
Cl. 16(Verification)	-	335	-
Cl.15(Verification)	-	250	-
Cl.14(Verification)	-	375	-
Cl.13(Verification)	-	330	-
Cl.11(Verification)	-	167	-
Cl.10(Verification)	-	500	-
Cl.8(Verification)	-	500	-
Cl. 7(Verification)	-	12	-
Cl. 6(Verification)	-	80	-

Complete

23 Jun, 2022

-
-

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	100	-
5.1(By inspection)	-	200	-
5.2(By inspection)	-	200	-
6.1(By inspection)	-	24	-
6.2(By inspection)	-	24	-
6.3(By inspection)	-	24	-
6.4(By inspection)	-	24	-
6.4.3(By inspection)	-	24	-
6.5(By inspection)	-	24	-
6.5.1(IEC 60529 and by inspection)	-	24	-
6.5.2(IEC 60529 and by inspection)	-	24	-
6.5.3(Annexure N and by inspection)	-	24	-
6.6(By inspection)	-	24	-
6.7.1(By inspection)	-	24	-
6.7.2(By inspection)	-	24	-
6.8(By inspection)	-	24	-
6.8.2(By inspection)	-	24	-
6.9(Annexure H and by inspection)	-	24	-
6.1(By inspection)	-	24	-
6.11(By inspection)	-	24	-
6.12(By inspection)	-	24	-
6.13(By inspection)	-	24	-
6.14(By inspection)	-	24	-
6.15(Annexure J and by inspection)	-	24	-
6.16(By inspection)	-	24	-
6.17(Annexure H)	-	24	-
6.18(Annexure H)	-	24	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	1995	-
9(By inspection)	-	67	-
9.1.1(By inspection)	-	67	-
9.1.2(By inspection)	-	67	-
9.1.3(By inspection)	-	67	-
9.2(By inspection)	-	67	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	67	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	67	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	67	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	67	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	67	-
9.4(by inspection and by plating)	-	67	-
9.4.1(by inspection)	-	67	-
9.4.2(by inspection)	-	67	-
9.5.1(by inspection)	-	67	-
9.5.2(by inspection)	-	67	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	80	-
10.1.2(By inspection )	-	80	-
10.1.3(By inspection )	-	80	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	80	-
10.1.5(By measurement)	-	80	-
10.1.5.1(by inspection, by measurement, by torque test)	-	80	-
10.1.6(by inspection after cl 10.1.5)	-	80	-
10.1.7(by inspection)	-	80	-
10.1.7.1(by inspection)	-	80	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	80	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	80	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	80	-
10.1.11(By inspection)	-	80	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	80	-
10.1.13(By inspection and after the test of cl 17)	-	80	-
10.1.14(By inspection)	-	80	-
10.1.15(Figure 11 or 12)	-	80	-
10.2(By inspection)	-	80	-
10.2.1(Table 10.2.1)	-	80	-
10.2.3(By inspection)	-	80	-
10.2.4.1(Figure 14 or 15)	-	80	-
10.2.4.2(During the test of cl 14)	-	80	-
10.2.4.3(As per table 10.2.4.3)	-	80	-
10.2.4.4(As per Figure 16)	-	80	-
11.1(By inspection)	-	40	-
11.1.1(By inspection)	-	40	-
11.1.2(by inspection and by analysis of the material)	-	40	-
11.1.3(by inspection)	-	40	-
11.2(by inspection and by test)	-	40	-
11.2.2(by inspection, by measurement and/or by manual test)	-	40	-
11.2.3(by inspection, by measurement and/or by manual test)	-	40	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	40	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	40	-
11.2.5(As per annexure H, cl 11.2.5)	-	40	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	40	-
11.3.2(by inspection and by the tests of clauses 13)	-	40	-
11.3.3(by inspection)	-	40	-
11.3.4(by inspection)	-	40	-
11.3.5(by inspection)	-	40	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	40	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	40	-
11.3.8(by inspection)	-	40	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	40	-
11.4.1 (by inspection)	-	40	-
11.4.2(by inspection)	-	40	-
11.4.3(by the tests of clauses 15 to 17)	-	40	-
11.4.4 to 11.4.16(As per relevent type)	-	40	-
11.5(by inspection)	-	40	-
11.6.1(by inspection and by manual test)	-	40	-
11.6.2(by inspection and by manual test)	-	40	-
11.6.3.1(By inspection)	-	40	-
11.6.3.2(By inspection)	-	40	-
11.6.3.3(By inspection)	-	40	-
11.6.3.4(By inspection)	-	40	-
11.6.3.5(By inspection)	-	40	-
11.6.3.6(By inspection)	-	40	-
11.6.3.7(By inspection)	-	40	-
11.7.1(By Flexing test as per fig 9)	-	40	-
11.7.1.2.2(By Flexing test as per fig 9)	-	40	-
11.7.1.2.3(By Flexing test as per fig 9)	-	40	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	40	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	40	-
11.7.2.11 to 11.7.2.15(By measurement)	-	40	-
11.8(By inspection)	-	40	-
11.8.1(By inspection)	-	40	-
11.8.2(By inspection and as per table 11.8.2)	-	40	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	40	-
11.9.1(By inspection)	-	40	-
11.9.1.1(by inspection and manual test)	-	40	-
11.9.1.2(by inspection and manual test)	-	40	-
11.9.1.3(by inspection and manual test)	-	40	-
11.9.1.4(by inspection and manual test)	-	40	-
11.10.1(by inspection)	-	40	-
11.10.2(by inspection)	-	40	-
11.10.3(by inspection and by test of socket-outlet system)	-	40	-
11.11(Requirements during mounting, maintenance and servicing)	-	40	-
11.11.1(By inspection)	-	40	-
11.11.1.1(By inspection)	-	40	-
11.11.1.2(By inspection)	-	40	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	40	-
11.11.1.5.4(By inspection)	-	40	-
11.11.1.5.6(by pull test)	-	40	-
11.11.2(By inspection)	-	40	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	40	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	40	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	40	-
11.11.4(By inspection)	-	40	-
11.11.5(By inspection and by manual test)	-	40	-
11.11.6(By inspection)	-	40	-
11.11.7(By inspection)	-	40	-
11.12(As per H, cl 11.12)	-	40	-
12.1(As per IEC 60529)	-	438	-
12.1.6.2(Torque test)	-	438	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	438	-
13.1(as per table 13.1)	-	1168	-
13.2(As per table 13.2)	-	1168	-
12.3(as per cl 12.3.1 to 12.3.7)	-	438	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	1168	-
14.1(As per table 14.1)	-	334	-
14.3(As per table 14.1)	-	334	-
15(as per cl 15.1 to 15.4)	-	1667	-
15.5(as per cl 15.5 to 15.6)	-	1667	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	1667	-
15.7(as per annexure J, cl 15.7)	-	1667	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	1000	-
16.2.4(test of cl 15 repeated )	-	1000	-
16.2.4(42 of table 7.2)	-	1000	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	1818	-
17.6(as per cl 17.6.1 and 17.6.2)	-	1818	-
17.7(as per cl 17.7.1 to 17.7.7)	-	1818	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	1818	-
17.9(as per cl 17.9.1 to 17.9.4)	-	1818	-
17.1(as per cl 17.10.1 to 17.10.4)	-	1818	-
17.11(as per cl 17.11.1 to 17.11.4)	-	1818	-
17.12(as per cl 17.12.1 to 17.12.5)	-	1818	-
17.13(as per cl 17.13.1 to 17.13.4)	-	1818	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	1818	-
H.17.14(as per cl H 17.4.16)	-	1818	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	1818	-
J 17.18.5(as per cl J 17.8.5)	-	1818	-
J 17.18.5(as per cl J 17.8.6)	-	1818	-
J 17.17.2(as per table 13.1)	-	1818	-
J 17.17(As per table 13.2)	-	1818	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	1818	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	1818	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	1818	-
18.1.6(By inspection)	-	209	-
18.1.6.1(By inspection)	-	209	-
18.1.6.2(By inspection)	-	209	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	209	-
18.2(Impact tester)	-	209	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	209	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	209	-
18.7(Pull test as per table 18.7)	-	209	-
18.8(as per cl 18.8.2 and 18.8.3)	-	209	-
18.9(axial pull of 15N/30N)	-	209	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	157	-
19.2.1(By inspection)	-	157	-
19.2.2(By inspection)	-	157	-
19.2.3(By inspection)	-	157	-
19.2.4(By inspection)	-	157	-
19.2.4.1(By inspection)	-	157	-
19.2.5(By inspection)	-	157	-
19.2.5.1(By inspection)	-	157	-
19.2.6(By inspection)	-	157	-
20.1(as per table 20.2)	-	834	-
20.2.1(as per table 20.3)	-	834	-
20.2.2(as per table 20.4)	-	834	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	1000	-
21.2.2 to 21.2.6(as per annexure G)	-	1000	-
21.2.7(As per cl G.4)	-	1000	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	3978	-
24.1(as per IEC 60742)	-	500	-
24.1(as per IEC 60384-14)	-	500	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	2000	-
27.1(as per annexure H)	-	750	-
27.2(as per cl 27.2.1 and 27.2.2)	-	750	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	750	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	750	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	40	-
11.1.102(As per IEC 60216-1:2001)	-	40	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	40	-
11.4.101(as per cl 11.4.101)	-	40	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	40	-
11.4.107(As per annexure DD)	-	40	-
11.6.3.101(As per table 7, item 117)	-	40	-
11.101(As per annexure BB)	-	40	-
12.101(None)	-	438	-
12.101.2(15 K+Tmax for 16 hr)	-	438	-
12.101.5(as per 12.103 to 12.105)	-	438	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	438	-
14.101.1( as per cl 14.102 and 14.102.1)	-	334	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	1667	-
15.5.3.109( voltage specified in Table 13.2)	-	1667	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	1818	-
17.16.107( 250 thermal cycles.)	-	1818	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	1818	-
17.101.1(as per cl 17.101.1 to 17.105)	-	1818	-
18.101(as per cl 18.101.2 and 101.3)	-	209	-
18.102(Hydrualic test)	-	209	-

Complete

23 Jun, 2022

-
-

IS/IEC 61730 : PART 2 (2019)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Jun, 2022

-
-

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

1330000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	10000	NA
5.1(Mechanical Endurance)	-	10000	NA
5.2(Charge efficiency)	-	100000	NA
5.3(Deep discharge protection)	-	100000	NA
5.4(Marking)	-	3000	NA
5.5(Dafety)	-	20000	NA
5.6(Documentation)	-	10000	NA
6(Finctional Characteristics)	-	5000	NA
7(General test conditions)	-	5000	NA
8.1(Capacity test)	-	100000	NA
8.2(Endurance test)	-	300000	NA
8.3(Charge retention test)	-	200000	NA
8.4(Cycle endurance in Photovoltaic application)	-	200000	NA
8.5(Sulphation Test)	-	200000	NA
8.6(Water loss test)	-	30000	NA
8.7(Non spillability)	-	67000	NA

Complete

23 Jun, 2022

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

110000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	10000.00	N/A
4.7(Marking & instructions)	-	4000.00	N/A
5.1(Protection against shock and energy hazards)	-	6000.00	N/A
5.2(Requirement of auxiliary circuits)	-	3000.00	N/A
5.3(Protective earthing and bonding)	-	3000.00	N/A
5.4(AC and DC power isolation)	-	4000.00	N/A
5.5(Over current and earth fault condition)	-	4000.00	N/A
5.6(Safety interlocks)	-	5000.00	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000.00	N/A
6.1(Wiring, connections and supply)	-	7000.00	N/A
6.2(Connection to power)	-	7000.00	N/A
6.3(Wiring terminals for external power conductors)	-	6000.00	N/A
7.1(Enclosure)	-	3000.00	N/A
7.2(STABILITY)	-	2000.00	N/A
7.3(MECHANICAL STRENGTH)	-	2000.00	N/A
7.4(Construction details)	-	3000.00	N/A
7.5(Resistance to fire)	-	2000.00	N/A
7.7(Temperature rise)	-	10000.00	N/A
8.1(General procision for earth leakage)	-	6000.00	N/A
8.2(Electric Strength)	-	6000.00	N/A
8.3(Abnormal operating and fault conditions)	-	6000.00	N/A
9.0(Connection to telecommunication networks)	-	4000.00	N/A
4.5(Components)	-	1000	-
7.6(Battery location)	-	1000	-

Complete

23 Jun, 2022

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	5000	-
10(cap temperature)	-	10000	-
11(Resistance to Heat)	-	5000	-
12(Resistance to Flame and Ignition)	-	5000	-
13(Fault conditions)	-	5000	-
14(Creepage distance and clearances)	-	5000	-

Complete

23 Jun, 2022

-
-

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

155000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	NA
5(General Safety Considerations)	-	500	NA
5.1(General)	-	500	NA
5.2(Insulation and Wiring)	-	4000	NA
5.3(Venting)	-	3000	NA
5.4(Temperature, Voltage and Current Management)	-	10000	NA
5.5(Terminal Contacts)	-	10000	NA
5.6(Assembly of Cells into batteries)	-	18000	NA
5.7(Quality Plan)	-	500	NA
6(Tyoe Test amd Sample Size)	-	500	NA
7(Specific requirements and tests)	-	5000	NA
7.1(Charging procedure for test purposes)	-	5000	NA
7.2(Intended Use)	-	70000	NA
7.3(Reasonably foreseeable misuse)	-	57000	NA
8(Information for safety)	-	5000	NA
8.1(General)	-	5000	NA
8.2(Small Cell and battery safety information)	-	1000	NA
9(Marking)	-	500	NA
9.1(Cell Marking)	-	500	NA
9.2(Battery Marking)	-	1000	NA
9.3(Caution for ingestion of small cells and batteries)	-	1000	NA
9.4(Other information)	-	1000	NA
10(Packaging)	-	500	NA

Complete

23 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	1000.00	N/A
20.4(General Test Requireements)	-	1000.00	N/A
20.5(Classification of Luminaires')	-	1000.00	N/A
20.7(Construction)	-	2000.00	N/A
20.8(Creepage Distance and Clearances)	-	3000.00	N/A
20.10(Terminals)	-	4000.00	N/A
20.11(External & Internal Wiring)	-	3000.00	N/A
20.12(Protection against electric shock)	-	5000.00	N/A
20.13(Endurance Tests and Thermal Tests)	-	11000.00	N/A
20.14(Resistance to Dust & Moisture)	-	5000.00	N/A
20.15(Insulation Resistance and Electric Strength)	-	6000.00	N/A
20.16(Resistance to Heat , fire and tracking)	-	6000.00	N/A

Complete

23 Jun, 2022

-
-

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000.00	N/A
7(Marking and instructions)	-	1000.00	N/A
8(Protection against live parts)	-	2000.00	N/A
10(POWER INPUT AND CURRENT)	-	1000.00	N/A
11(HEATING)	-	3000.00	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000.00	N/A
14(TRANSIENT OVERVOLTAGES)	-	3000.00	N/A
15(MOISTURE RESISTANCE)	-	2000.00	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000.00	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000.00	N/A
19(ABNORMAL OPERATION)	-	3000.00	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	2000.00	N/A
21(MECHANICAL STRENGTH)	-	2000.00	N/A
22(CONSTRUCTION)	-	1000.00	N/A
23(INTERNAL WIRING)	-	2000.00	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000.00	N/A
27(PROVISION FOR EARTHING)	-	1000.00	N/A
28(SCREWS AND CONNECTIONS)	-	1000.00	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000.00	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	2000.00	N/A
31(RESISTANCE TO RUSTING)	-	2000.00	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000.00	N/A

Complete

23 Jun, 2022

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

65000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500.00	N/A
7(Marking and instructions)	-	1000.00	N/A
8(Protection against live parts)	-	2500.00	N/A
10(POWER INPUT AND CURRENT)	-	2000.00	N/A
11(HEATING)	-	3000.00	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000.00	N/A
14(IMPULSE VOLTAGE TEST)	-	3000.00	N/A
15(HUMIDITY TREATMENT TEST)	-	2000.00	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000.00	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000.00	N/A
18(ENDURANCE)	-	10000.00	N/A
19(ABNORMAL OPERATION)	-	3000.00	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	2000.00	N/A
21(MECHANICAL STRENGTH)	-	5000.00	N/A
22(CONSTRUCTION)	-	3000.00	N/A
23(INTERNAL WIRING)	-	2000.00	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000.00	N/A
27(PROVISION FOR EARTHING)	-	1000.00	N/A
28(SCREWS AND CONNECTIONS)	-	1000.00	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000.00	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	5000.00	N/A
31(RESISTANCE TO RUSTING)	-	3000.00	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000.00	N/A

Complete

23 Jun, 2022

-
-

IS 16046 : Part 2 (2018)

148000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	NA
5(General Safety Considerations)	-	500	NA
5.1(General)	-	500	NA
5.2(Insulation and Wiring)	-	4000	NA
5.3(Venting)	-	3000	NA
5.4(Temperature, Voltage and Current Management)	-	10000	NA
5.5(Terminal Contacts)	-	10000	NA
5.6(Assembly of Cells into batteries)	-	18000	NA
5.7(Quality Plan)	-	500	NA
5.8(Battery Safety Components)	-	500	NA
6(Tyoe Test amd Sample Size)	-	500	NA
7(Specific requirements and tests)	-	500	NA
7.1(Charging procedure for test purposes)	-	20000	NA
7.2(Intended Use)	-	45000	NA
7.3(Reasonably foreseeable misuse)	-	51000	NA
8(Information for safety)	-	5000	NA
8.1(General)	-	5000	NA
8.2(Small Cell and battery safety information)	-	1000	NA
9(Marking)	-	500	NA
9.1(Cell Marking)	-	500	NA
9.2(Battery Marking)	-	1000	NA
9.3(Caution for ingestion of small cells and batteries)	-	1000	NA
9.4(Other information)	-	1000	NA
10(Packaging)	-	500	NA

Complete

23 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

48000.00 View breakup
Rs.48000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000.00	N/A
4(General Test Requireements)	-	1000.00	N/A
5(Classification of Luminaires')	-	1000.00	N/A
7.0(Construction)	-	6000.00	N/A
8.0(Creepage Distance and Clearances)	-	2000.00	N/A
9.0(Provision for earthing)	-	2000.00	N/A
10.0(Terminals)	-	2000.00	N/A
11.0(External & Internal Wiring)	-	5000.00	N/A
12.0(Protection against electric shock)	-	3000.00	N/A
13.0(Endurance Tests and Thermal Tests)	-	10000.00	N/A
14.0(Resistance to Dust & Moisture)	-	5000.00	N/A
15.0(Insulation Resistance and Electric Strength)	-	5000.00	N/A
16.0(Resistance to Heat , fire and tracking)	-	5000.00	N/A

Complete

23 Jun, 2022

-
0.0

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
6(Classification )	-	125	-
6(Classification )	-	125	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	250	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	375	-
(Cl.11 of 302-2-21:2011)(Heating)	-	166	-
(Cl.11 of 302-2-21:2011)(Heating)	-	166	-
(Cl.11 of 302-2-21:2011)(Heating)	-	166	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	166	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	333	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	375	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	375	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	375	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	83	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	83	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	83	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	83	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	250	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	375	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	8	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	8	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl.24ofIS302-221:2011)(Component)	-	107	-
(Cl.24ofIS302-221:2011)(Component)	-	107	-
(Cl.24ofIS302-221:2011)(Component)	-	107	-
(Cl.24ofIS302-221:2011)(Component)	-	107	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	83	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	83	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	83	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	83	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	167	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	375	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	375	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	375	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1500	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
7(Marking)	-	12	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	8	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	455	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	30	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	83	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	83	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1500	-
Cl.22 of IS 2082:2018(Finish)	-	1000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	1500	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1500	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	375	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	375	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	375	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	167	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	167	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	250	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	250	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	250	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	83	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	30	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	30	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	30	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	30	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	30	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	30	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	30	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	30	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	107	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	107	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	107	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	455	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	455	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	8	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	8	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	8	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	8	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	8	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	8	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	8	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	8	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	8	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	8	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	8	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	8	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	8	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	8	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	8	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	8	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	8	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	8	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	8	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	8	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	8	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	8	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	8	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	8	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	8	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	8	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	375	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	375	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	250	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	83	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	83	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	83	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	83	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	83	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	375	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	333	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	166	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	166	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	166	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	375	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	250	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	15	-
7.14(Marking : Legibility and durability)	-	12	-
7.13(Marking : Official language of Instruction )	-	12	-
7.11(Marking : Indication of controls )	-	12	-
7.8(Marking : Terminals )	-	12	-
7.6(Marking : Symbol used )	-	12	-
7.1(Marking : Warning for Open- outlet )	-	12	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	12	-
7.1(Marking : Statement for a pressure-relief device)	-	12	-
7.1(Marking : Rated capacity)	-	12	-
7.1(Marking : Rated pressure)	-	12	-
7.1(Marking : Country of manufacture)	-	12	-
7.1(Marking: IP Number)	-	12	-
7.1(Marking: Symbol for Class II)	-	12	-
7.1(Marking: Model or type reference)	-	12	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	12	-
7.1(Marking : Rated power input)	-	12	-
7.1(Marking : Symbol for nature of supply )	-	12	-
7.1(Marking : Rated Voltage )	-	12	-

Complete

23 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

48000.00 View breakup
Rs.48000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000.00	N/A
4(General Test Requireements)	-	1000.00	N/A
5(Classification of Luminaires')	-	1000.00	N/A
7.0(Construction)	-	3000.00	N/A
8.0(Creepage Distance and Clearances)	-	2000.00	N/A
9.0(Provision for earthing)	-	5000.00	N/A
10.0(Terminals)	-	5000.00	N/A
11.0(External & Internal Wiring)	-	2000.00	N/A
12.0(Protection against electric shock)	-	3000.00	N/A
13.0(Endurance Tests and Thermal Tests)	-	10000.00	N/A
14.0(Resistance to Dust & Moisture)	-	5000.00	N/A
15.0(Insulation Resistance and Electric Strength)	-	5000.00	N/A
16.0(Resistance to Heat , fire and tracking)	-	5000.00	N/A

Complete

23 Jun, 2022

-
Excluding Photometric test (Cl.17)

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	35	-
8.1,a(Marking )	-	35	-
8.1,b(Marking )	-	35	-
8.1,c(Marking )	-	35	-
8.1,d(Marking )	-	35	-
8.1,e(Marking )	-	35	-
8.1,f(Marking )	-	35	-
8.1,g(Marking )	-	35	-
8.2(Marking )	-	35	-
8.3,a(Marking )	-	35	-
8.3,b(Marking )	-	35	-
8.3,c(Marking )	-	35	-
8.3,d(Marking )	-	35	-
8.3,e(Marking )	-	35	-
8.4(Marking )	-	35	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	35	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	35	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	35	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	115	-
10.2(Speed Regulators)	-	115	-
10.2(Speed Regulators)	-	115	-
10.2(Speed Regulators)	-	115	-
10.3(Speed Regulators)	-	115	-
10.4(Speed Regulators)	-	115	-
10.5(Speed Regulators)	-	115	-
10.6(Speed Regulators)	-	115	-
10.7(Speed Regulators)	-	115	-
10.7(Speed Regulators)	-	115	-
10.8(Speed Regulators)	-	115	-
11.1(Starting)	-	333	-
11.2(Starting)	-	333	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	388	-
14.3 & Table 1(Test for Air Performance)	-	388	-
14.4(Measurement of Speed of the Fan )	-	388	-
14.4(Measurement of Speed of the Fan )	-	388	-
14.5(Measurement of Power factor and Power Input)	-	388	-
14.5(Measurement of Power factor and Power Input)	-	388	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
17(Test for Harmonic Distortion)	-	750	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
10.8(Speed Regulators)	-	115	-
11.2(Starting)	-	333	-
14.3 & Table 1(Test for Air Performance)	-	388	-
14.4(Measurement of Speed of the Fan )	-	388	-
14.4(Measurement of Speed of the Fan )	-	388	-
14.5(Measurement of Power factor and Power Input)	-	5500	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
17(Test for Harmonic Distortion)	-	750	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	35	-
8.1,a(Marking )	-	35	-
8.1,b(Marking )	-	35	-
8.3,c(Marking )	-	35	-
8.1,d(Marking )	-	35	-
8.1,f(Marking )	-	35	-
8.1,g(Marking )	-	35	-
8.2(Marking )	-	35	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	35	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	35	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.2(Speed Regulators)	-	115	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-
16(Endurance Test)	-	181	-

Complete

23 Jun, 2022

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

48000.00 View breakup
Rs.48000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000.00	N/A
8(Protection against accidental contact with live parts)	-	5000.00	N/A
9(Terminals)	-	5000.00	N/A
10(PROVISION FOR EARTHING)	-	5000.00	N/A
11(MOISTURE RESISTANCE)	-	5000.00	N/A
12(Electric Strength)	-	4000.00	N/A
14(Fault conditions)	-	3000.00	N/A
15(Transformer heating)	-	3000.00	N/A
16(Construction)	-	2000.00	N/A
17(Creepage distance and clearances)	-	2000.00	N/A
18(Screws, current carrying parts and connections)	-	2000.00	N/A
19(Resistance to heat, fire and tracking)	-	5000.00	N/A
20(Resistance to corrosion)	-	2000.00	N/A
13(Thermal endurance test for winding of ballasts)	-	3000.00	N/A

Complete

23 Jun, 2022

-
Including Amd.01 w.e.f. 21-07-2017

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	300	-
6(Classification- IS 302-1)	-	300	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.1(Marking- IS 302-1)	-	31	-
7.3(Marking- IS 302-1)	-	31	-
7.4(Marking- IS 302-1)	-	31	-
7.6(Marking- IS 302-1)	-	31	-
7.7(Marking- IS 302-1)	-	31	-
7.8(Marking- IS 302-1)	-	31	-
7.11(Marking- IS 302-1)	-	31	-
7.12(Marking- IS 302-1)	-	31	-
7.13(Marking- IS 302-1)	-	31	-
7.14(Marking- IS 302-1)	-	31	-
7.15(Marking- IS 302-1)	-	31	-
7.101(Marking)	-	31	-
8( Protection Against Electric Shock, IS 302-1)	-	600	-
10(Power Input and Current, IS 302-1)	-	600	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	-
14(Transient Over Voltages, IS 302-1)	-	600	-
15.1(Moisture Resistance, IS 302-1)	-	167	-
15.2(Moisture Resistance, IS 302-1)	-	167	-
15(Moisture Resistance, IS 302-1)	-	167	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	750	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	750	-
19.7(Abnormal Operation, IS 302-1)	-	167	-
19.9(Abnormal Operation, IS 302-1)	-	167	-
19.1(Abnormal Operation, IS 302-1)	-	167	-
19.101(Abnormal Operation)	-	167	-
19.102(Abnormal Operation)	-	167	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	28	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	28	-
20.101(Stability & Mechanical Hazards)	-	28	-
20.102(Stability & Mechanical Hazards)	-	28	-
20.103(Stability & Mechanical Hazards)	-	28	-
20.104(Stability & Mechanical Hazards)	-	28	-
20.105(Stability & Mechanical Hazards)	-	28	-
20.106(Stability & Mechanical Hazards)	-	28	-
20.107(Stability & Mechanical Hazards)	-	28	-
20.108(Stability & Mechanical Hazards)	-	28	-
20.109(Stability & Mechanical Hazards)	-	28	-
20.110(Stability & Mechanical Hazards)	-	28	-
20.111(Stability & Mechanical Hazards)	-	28	-
20.112(Stability & Mechanical Hazards)	-	28	-
20.113(Stability & Mechanical Hazards)	-	28	-
20.114(Stability & Mechanical Hazards)	-	28	-
20.115(Stability & Mechanical Hazards)	-	28	-
20.116(Stability & Mechanical Hazards)	-	28	-
21.1(Mechanical Strength, IS 302-1)	-	375	-
21.2(Mechanical Strength, IS 302-1)	-	28	-
22.1(Construction, IS 302-1)	-	167	-
22.101(Construction)	-	167	-
22.102(Construction)	-	167	-
23.1(Internal Wiring, IS 302-1)	-	75	-
23.2(Internal Wiring, IS 302-1)	-	75	-
23.3(Internal Wiring, IS 302-1)	-	75	-
23.4(Internal Wiring, IS 302-1)	-	75	-
23.5(Internal Wiring, IS 302-1)	-	75	-
23.6(Internal Wiring, IS 302-1)	-	75	-
23.7(Internal Wiring, IS 302-1)	-	75	-
23.8(Internal Wiring, IS 302-1)	-	75	-
23.9(Internal Wiring, IS 302-1)	-	75	-
23.10(Internal Wiring, IS 302-1)	-	75	-
24.1(Components, IS 302-1)	-	125	-
24.2(Components, IS 302-1)	-	125	-
24.5(Components, IS 302-1)	-	125	-
24.6(Components, IS 302-1)	-	125	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	25	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	750	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	375	-
30.2(Resistance to Heat and Fire, IS 302-1 disable)	-	375	-
31(Resistance of Rusting, IS 302-1)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	100	-
19.8(Abnormal Operation, IS 302-1)	-	167	-

Complete

23 Jun, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE KUNDLI

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 [email protected]

Scope List

No Record Found

No Record Found

No Record Found