BIS - LIMS (Laboratory Information Management System)

AB MSAI Research Labs PVT. LTD.

A-1/6 (Basement, Stilt & U.G.F), Paschim Vihar, Delhi, New Delhi, Delhi, 110063

7290001650 [email protected]

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

50007 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	10000		GST Not Included
5.2(Message Readability)	-	40007		GST Not Included

Complete

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60007 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	GST not Included
1.6(Power interface .)	-	2001	GST not Included
1.7(Markings and instructions)	-	1000	GST not Included
2.1(Protection from electric shock and energy hazards)	-	2001	GST not Included
2.2(SELV circuits)	-	2000	GST not Included
2.4(Limited current circuits)	-	1000	GST not Included
2.5(Limited power sources .)	-	1000	GST not Included
2.6(Provisions for earthing and bonding)	-	1000	GST not Included
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	GST not Included
2.8(Safety interlocks)	-	1000	GST not Included
2.9(Electrical insulation)	-	4000	GST not Included
2.10(Clearances, creepage distances and distances through insulation)	-	4001	GST not Included
2.3(TNV circuits)	-	1000	GST not Included
3.1(General)	-	1000	GST not Included
3.2(Connection to a mains supply)	-	1000	GST not Included
3.3(Wiring terminals for connection of external conductors)	-	1000	GST not Included
3.4(Disconnection from the mains supply)	-	1000	GST not Included
3.5(Interconnection of equipment)	-	1001	GST not Included
4.1(Stability)	-	1000	GST not Included
4.2(Mechanical strength)	-	6001	GST not Included
4.3(Design and construction)	-	1000	GST not Included
4.4(Protection against hazardous moving parts)	-	2000	GST not Included
4.5(Thermal requirements)	-	5000	GST not Included
4.6(Openings in enclosures)	-	1000	GST not Included
4.7(Resistance to fire)	-	2000	GST not Included
5.1(Touch current and protective conductor curren)	-	1001	GST not Included
5.2(Electric strength)	-	1000	GST not Included
5.3(Abnormal operating and fault conditions)	-	2000	GST not Included
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	GST not Included
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	4001	GST not Included
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	GST not Included
7.1(General)	-	1000	GST not Included
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	GST not Included
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	GST not Included
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	GST not Included

Complete

-
-

IS 16048 : Part 2 (2013)

Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Portable sealed rechargeable single cells: Part 2 nickel - Metal hydride

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

80007 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5001	GST not Included
6(Hazardous radiations)	-	0.0	GST not Included
7(Heating under normal operating conditions)	-	5001	GST not Included
8(Constructional requirements with regard to the protection against electric shock)	-	3000	GST not Included
9(Electric shock hazard under normal operating conditions)	-	6000	GST not Included
10(Insulation requirements)	-	20001	GST not Included
11(Fault conditions)	-	7000	GST not Included
12(Mechanical strength)	-	11000	GST not Included
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	GST not Included
14(Components)	-	2000	GST not Included
15(TERMINALS)	-	3001	GST not Included
16(External flexible cords)	-	2000	GST not Included
17(Electrical connections and mechanical fixings)	-	2000	GST not Included
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	GST not Included
19(Stability and mechanical hazards)	-	3001	GST not Included
20(Resistance to fire)	-	8000	GST not Included

Complete

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

80007 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	N/A
5(General Safety Considerations)	-	0	N/A
5.1(General)	-	0	N/A
5.2(Insulation and Wiring)	-	0	N/A
5.3(Venting)	-	0	N/A
5.4(Temperature, Voltage and Current Management)	-	0	N/A
5.5(Terminal Contacts)	-	0	N/A
5.6(Assembly of Cells into batteries)	-	0	N/A
5.7(Quality Plan)	-	0	N/A
5.8(Battery Safety Components)	-	0	N/A
6(Tyoe Test amd Sample Size)	-	0	N/A
7(Specific requirements and tests)	-	0	N/A
7.1(Charging procedure for test purposes)	-	0	N/A
7.2(Intended Use)	-	41000	N/A
7.3(Reasonably foreseeable misuse)	-	72000	N/A
8(Information for safety)	-	0	N/A
8.1(General)	-	0	N/A
8.2(Small Cell and battery safety information)	-	0	N/A
9(Marking)	-	0	N/A
9.1(Cell Marking)	-	0	N/A
9.2(Battery Marking)	-	0	N/A
9.3(Caution for ingestion of small cells and batteries)	-	0	N/A
9.4(Other information)	-	0	N/A
10(Packaging)	-	0	N/A

Complete

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

144000 View breakup
Rs.1,44,000/- [[10 % Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	0	N/A
4.6(Power interface)	-	10000	N/A
4.7(Marking & instructions)	-	9999.99	N/A
5.1(Protection against shock and energy hazards)	-	8000	N/A
5.2(Requirement of auxiliary circuits)	-	8000	N/A
5.3(Protective earthing and bonding)	-	8000	N/A
5.4(AC and DC power isolation)	-	4000	N/A
5.5(Over current and earth fault condition)	-	8000	N/A
5.6(Safety interlocks)	-	8000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	8000	N/A
6.1(Wiring, connections and supply)	-	0	N/A
6.2(Connection to power)	-	0	N/A
6.3(Wiring terminals for external power conductors)	-	0	N/A
7.1(Enclosure)	-	0	N/A
7.2(STABILITY)	-	8000	N/A
7.3(MECHANICAL STRENGTH)	-	8000	N/A
7.4(Construction details)	-	8000	N/A
7.5(Resistance to fire)	-	8000	N/A
7.6(Battery location)	-	8000	N/A
7.7(Temperature rise)	-	8000	N/A
8.1(General procision for earth leakage)	-	8000	N/A
8.2(Electric Strength)	-	8000	N/A
8.3(Abnormal operating and fault conditions)	-	8000	N/A
9.0(Connection to telecommunication networks)	-	0	N/A

Complete

-
Included w.e.f. 20-05- 2020. Restricted upto 5 kVA & IP40. Excluding: Components (Cl.4.5/ RD, Cl. 1.5), Switches & Relays (Cl. 2.8.2, 2.8.5 & 2.8.7), Winding Wires (Cl. 2.10.5.3), Semiconductor Devices (Cl. 2.10.5.4), SMPS/ Mains Transformer (Cl. 2.10.5.11), Test on coated printed boards and coated components (Cl.5.7/RD 2.10.8), Wire in wound components (Cl. 2.10.5.12), Wire with solvent based enamel in wound components (Cl. 2.10.5.13), Additional insulation in wound components (Cl. 2.10.5.14), Tests for pollution degree 1 environment & for insulating compound (Cl. 2.10.10), Tests for semiconductor devices & for cemented joints (Cl. 2.10.11), Enclosed & sealed parts (Cl. 2.10.12), Internal Wire (Cl. 3.1.4), Batteries (Cl. 4.3.8), Protection of Personnel Safety Interlocks (Cl. 5.6), AC power cords (Cl.6.2.1/RD Cl.3.2.6.1), Non-rewirable Plug with PVC Sheathed Cable (Cl. 3.2.5), Solid State Back-feed Protection (EMC Tests) (AnnexI.5), Non-linear loads (Cl.3.3.3 & Annex- L.5), Construction of printed circuit boards (Cl.5.7/RD/ 2.10.6), Wiring, connection and supply (Cl. 6.1.1/RD 3.1.4), Performance Tests: Simulators (ESD/EFT /Voltage Dip Interruption/PFMF),Gas Concentration, Ventilation of Battery Compartments (Cl.7.4.3, Cl.7.6.7 & Annex- M), Flammability test (Cl.7.5)

IS 16046 : Part 1 (2018)

80007 View breakup
Rs.80,007/- [10 % Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	N/A
5(General Safety Considerations)	-	0	N/A
5.1(General)	-	0	N/A
5.2(Insulation and Wiring)	-	0	N/A
5.3(Venting)	-	0	N/A
5.4(Temperature, Voltage and Current Management)	-	0	N/A
5.5(Terminal Contacts)	-	0	N/A
5.6(Assembly of Cells into batteries)	-	0	N/A
5.7(Quality Plan)	-	0	N/A
6(Tyoe Test amd Sample Size)	-	0	N/A
7(Specific requirements and tests)	-	0	N/A
7.1(Charging procedure for test purposes)	-	0	N/A
7.2(Intended Use)	-	41000	N/A
7.3(Reasonably foreseeable misuse)	-	72000	N/A
8(Information for safety)	-	0	N/A
8.1(General)	-	0	N/A
8.2(Small Cell and battery safety information)	-	0	N/A
9(Marking)	-	0	N/A
9.1(Cell Marking)	-	0	N/A
9.2(Battery Marking)	-	0	N/A
9.3(Caution for ingestion of small cells and batteries)	-	0	N/A
9.4(Other information)	-	0	N/A
10(Packaging)	-	0	N/A

Complete

-
REVISED 2018 VERSION Included w.e.f. 03.07.2019. Restricted upto 300A & 20V.

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

40007 View breakup
Rs.40,007/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	N/A
8(Protection against accidental contact with live parts)	-	2001	N/A
9(Terminals)	-	3001	N/A
10(PROVISION FOR EARTHING)	-	3001	N/A
11(MOISTURE RESISTANCE)	-	4001	N/A
12(Electric Strength)	-	2001	N/A
13(Thermal endurance test for winding of ballasts)	-	3000	N/A
14(Fault conditions)	-	6001	N/A
15(Transformer heating)	-	3000	N/A
16(Construction)	-	3000	N/A
17(Creepage distance and clearances)	-	1000	N/A
18(Screws, current carrying parts and connections)	-	2000	N/A
19(Resistance to heat, fire and tracking)	-	9001	N/A
20(Resistance to corrosion)	-	1000	N/A

Complete

-
Included w.e.f. 08-12-2020. EXCLUSION: Components: enclosures (Cl.16), Bridging resistor in primary circuit (Cl.16), capacitor an RC units (Cl.16), RF suppression (X-Y capacitors) (Cl.16), Inductor (Cl.16), MOV/VDR (Cl.16), Transparent cover (Cl.19), Bobbin (Cl.19), Insulated tape (Cl.16), heat shrinkage cleeve (Cl.16), connector (Cl.16), Fuse (Cl.16), Internal wire (Cl.16), LED (Cl.16), opto-coupler (Cl.16), EMI/EMC filter (Cl.16), Winding wire (Cl.16), Thin sheet materials (Cl.16

Bureau of Indian Standards

The National Standards Body of India

AB MSAI Research Labs PVT. LTD.

A-1/6 (Basement, Stilt & U.G.F), Paschim Vihar, Delhi, New Delhi, Delhi, 110063

7290001650 [email protected]

Scope List

No Record Found