BIS - LIMS (Laboratory Information Management System)

KC INDIA TEST LABORATORIES LLP

12/54, site iv, sahibabad industrial area, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

9599880265 [email protected]

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	4500		20%discount to BIS
5.2(Message Readability)	-	10000		20%discount to BIS

Complete

06 Jun, 2024

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	400	20% Discount to BIS
6(Interchangeability)	-	2000	20% Discount to BIS
7(Protection against accidental contact with live parts)	-	5000	20% Discount to BIS
8(Insulation Resistance and Electric Strength)	-	2000	20% Discount to BIS
9(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
10(cap temperature)	-	1000	20% Discount to BIS
11(Resistance to Heat)	-	1800	20% Discount to BIS
12(Resistance to Flame and Ignition)	-	2000	20% Discount to BIS
13(Fault conditions)	-	5000	20% Discount to BIS
14(Creepage distance and clearances)	-	1800	20% Discount to BIS

Complete

06 Jun, 2024

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

3315 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	40	20% discount to BIS
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	35	20% discount to BIS
7.1.1(Maximum and minimum outside diameter of socket)	-	50	20% discount to BIS
7.2(Minimum inside diameter of conduit)	-	50	20% discount to BIS
7.3(Length of conduit)	-	50	20% discount to BIS
7.4(Unifomity of The wall Thickness)	-	74	20% discount to BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	177	20% discount to BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1635	20% discount to BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	285	20% discount to BIS
10(Resistance to Heat -Ball presure test)	-	168	20% discount to BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS

Complete

06 Jun, 2024

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Heating under normal operating conditions)	-	6500	20% discount to BIS
5(Marking and instructions)	-	650	20% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	5200	20% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	5850	20% discount to BIS
10(Insulation requirements)	-	7800	20% discount to BIS
11(Fault conditions)	-	7150	20% discount to BIS
12(Mechanical strength)	-	3250	20% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	6500	20% discount to BIS
15(TERMINALS)	-	1300	20% discount to BIS
16(External flexible cords)	-	1300	20% discount to BIS
17(Electrical connections and mechanical fixings)	-	3250	20% discount to BIS
19(Stability and mechanical hazards)	-	3250	20% discount to BIS
20(Resistance to fire)	-	6500	20% discount to BIS

Complete

06 Jun, 2024

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	1300	breakup
1.7(Markings and instructions)	-	650	breakup
2.1(Protection from electric shock and energy hazards)	-	4550	breakup
2.2(SELV circuits)	-	1625	breakup
2.4(Limited current circuits)	-	1105	breakup
2.5(Limited power sources .)	-	975	breakup
2.6(Provisions for earthing and bonding)	-	1040	breakup
2.7(Overcurrent and earth fault protection in primary circuits)	-	650	breakup
2.8(Safety interlocks)	-	1625	breakup
2.9(Electrical insulation)	-	3250	breakup
2.10(Clearances, creepage distances and distances through insulation)	-	8255	breakup
3.1(General)	-	3250	breakup
3.2(Connection to a mains supply)	-	1300	breakup
3.3(Wiring terminals for connection of external conductors)	-	1300	breakup
3.4(Disconnection from the mains supply)	-	650	breakup
3.5(Interconnection of equipment)	-	650	breakup
4.1(Stability)	-	325	breakup
4.2(Mechanical strength)	-	2080	breakup
4.3(Design and construction)	-	650	breakup
4.4(Protection against hazardous moving parts)	-	975	breakup
4.5(Thermal requirements)	-	2990	breakup
4.6(Openings in enclosures)	-	2925	breakup
4.7(Resistance to fire)	-	2925	breakup
5.1(Touch current and protective conductor curren)	-	845	breakup
5.2(Electric strength)	-	1300	breakup
5.3(Abnormal operating and fault conditions)	-	2600	breakup
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1300	breakup
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3055	breakup
6.3(Protection of the telecommunication wiring system from overheating)	-	2600	breakup
7.1(General)	-	650	breakup
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	650	breakup
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2275	breakup
7.4(Insulation between primary circuits and cable distribution systems)	-	2600	breakup

Complete

06 Jun, 2024

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

42125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3125	20%discount to BIS
10.4(Flammability test- Unaffected portion)	-	625	20%discount to BIS
10.4(Flammability test-Burning after flame removal)	-	625	20%discount to BIS
10.1(HV (water immersion))	-	1875	For AC TEST 20%discount to BIS
10.1(HV (water immersion))	-	4375	FOR DC TEST 20%discount to BIS
10.5(Oxygen index)	-	4375	20%discount to BIS
10.7(Temperature index)	-	4375	20%discount to BIS
10.6(Halogen evolution)	-	3750	20%discount to BIS
10.2(HV (room temperature))	-	1875	20%discount to BIS
4.1(Annealing test (for copper))	-	625	20%discount to BIS
4.1(Tensile test (for Al)- After Stranding)	-	625	20%discount to BIS
4.1(Tensile test (for Al)-Before Stranding)	-	625	20%discount to BIS
4.1(Wrapping test (for Al))	-	625	20%discount to BIS
4.2(Conductor resistance test)	-	625	20%discount to BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	1250	20%discount to BIS
9(Overall dimensions)	-	625	20%discount to BIS
5.3(Thickness of Insulation)	-	625	20%discount to BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	625	20%discount to BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1875	20%discount to BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1875	20%discount to BIS
Table 1 iii) d) 9)(Cold impact for sheath)	-	1250	20%discount to BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	625	20%discount to BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	625	20%discount to BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	625	20%discount to BIS
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	2500	20%discount to BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	2500	20%discount to BIS
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	625	20%discount to BIS
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	625	20%discount to BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	3125	20%discount to BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	3125	20%discount to BIS
Table 1 iii) d) 8)(Cold bend for sheath)	-	1250	20%discount to BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	625	20%discount to BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	625	20%discount to BIS
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	625	20%discount to BIS

Complete

06 Jun, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

KC INDIA TEST LABORATORIES LLP

12/54, site iv, sahibabad industrial area, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

9599880265 [email protected]

Scope List