BIS - LIMS (Laboratory Information Management System)

BIS, Western Regional Office Laboratory (WROL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL OFFICE LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- [email protected]

Scope List

Reset

274 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

181

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1,7.2,7.3 Table 1 (Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

182

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Dimensions of pipes)	-
8.1 (Hydraulic characteristics)	-
8.2 (Reversion)	-
8.4 (Melt Flow Rate)	-
Cl. 8.5, IS 2530-1963, Cl. 16 (Carbon Black Dispersion)	-

Partial

-
-

183

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 13 (Length, Width & Thickness)	-
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 7 (UTM)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

Partial

-
-

184

IS 6006 (2014)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Weight)	-
Cl 7 (Tensile Test On UTM)	-
Cl 7 (Tensile Test On UTM)	-
Cl 7 (Tensile Test On UTM)	-
Cl 4 (Length )	-
Cl 7 (Tensile Test On UTM)	-
4.1.2 (phosphorus)	-

Partial

-
-

185

IS 5290 (1993)

Landing valves - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, 5.1 (a) fig-1, type A (Types AND DIMENSIONS)	-
5, 5.1 (b) fig-2, type B (Types AND DIMENSIONS)	-
5, 5.1 (a) fig-1, type A (Types AND DIMENSIONS)	-
5.2 (Types AND DIMENSIONS)	-
5.2.1 (Types AND DIMENSIONS)	-
7, 7.1 (7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve)	-
7, 7.2 (hydrostatics pressure tests)	-

Partial

-
-

186

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

Partial

-
-

187

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Depth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Width))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections(Thickness))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Weigth))	-
Cl. 10.1, 14.1, 18.1 (Straightness)	-
Cl. 10.4, Fig 2 (Concavity, X1)	-
Cl. 10.4, Fig 2 (Convexity, X2)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.7, Fig 5 (Total twist, V)	-
Cl. 15.2, Table 3 (Tensile Strength- IS 1608)	-
Cl. 15.2, Table 3 (Yield Strength- IS 1608)	-
Cl. 15.2, Table 3 (Elongation- IS 1608)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Weight on individual length)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Weight on individual length)	-

Partial

-
-

188

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Tensile Test & Flattening Test)	-
Cl 7 (Outer Diameter, Thickness, Mass & Straightness)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 10 (Outer Diameter & Overall Length)	-

Partial

-
-

189

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 9 (Press)	-
Cl 12 & 13 (Length, Width & Thickness)	-
Cl 12 & 13 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-

Partial

-
-

190

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5 (pH of Aqueous Extract )	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.2 (Dimensions Fig 1 and Table 1)	-
4.3 (Thickness)	-
4.4.2 (After accelerated aging at 70 + 1OC for 240 h )	-
4.4.3 (After heat ageing in autoclave)	-
4.4.4 (Tension Set)	-

Complete

-
-

191

IS 3745 (2006)

Yoke type valve connections for small medical gas cylinders - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 i) (i)Tensile Strength )	-
3.2.1 ii) ( Elongation)	-
3.2.2 (The izod impact strength)	-
5.3.6 (Types of ‘Valves and their Minimum Constructional Requirements)	-
6.1 Fig, 2 (BASIC “DIMENS1ONS FOR YOKE TYPE VALVE CONNECTIONS)	-
6.2 , Fig. 3. (BASIC “DIMENS1ONS FOR YOKE TYPE VALVE CONNECTIONS)	-
10 (HYDROSTATIC TESTS)	-
11 (PNEUMATIC TESTING)	-
13 (CYCLE TEST)	-

Partial

-
-

192

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.3 (Guided bend test(For SAW Pipes))	-
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
11.1, Table 5. (Mass)	-
12.3.3 (Ovality)	-
12.5 (Strightness)	-
9.2.1 (Flattening test for ERW pipes )	-
9.1 (Tensile test-Yield Strength)	-
9.1 (Tensile test-Strength)	-
9.1 (Tensile test- Elongation)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-

Partial

-
-

193

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Closure (Figure 2))	-
5.1 (Body and ends)	-
5.2 (Closures)	-
8 (Air Pressure Test)	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-

Complete

-
-

194

IS 3390 (1988)

Specification for sphygmomanometers, mercurial (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.2 (Fastening)	-
4.1 (Metal Parts)	-
4.2 (Rubber Parts -Inflation Bulb)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.3.1 & 4.8.3.2 (Inflating Bag)	-
4.8.3.1 & 4.8.3.2 (Inflating Bag)	-
4.8.4 (Tubing)	-
4.8.4 (Tubing)	-
4.9.1 (Pressure Measuring Device)	-
4.9.1 (Pressure Measuring Device)	-
4.9.3 (Reservoir and Connecting Tube)	-
4.9.4 (Extension Tube)	-

Partial

-
-

195

IS 3319 (1995)

Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5,5.1 & 5.2; Table 1 (Shape and dimensions)	-
9.1 ( Visual Examination)	-
7.1 (Hardness test)	-
Clause -4, 4.1 (SILICON)	-
Clause -4, 4.1 (MANGANESE)	-
Clause -4, 4.1 (PHOSPHURS)	-
Clause -4, 4.1 (SULPHUR)	-
Clause -4, 4.1 ( CARBON)	-

Partial

-
-

196

IS 3224 (2002)

Valve fittings for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3.2 (Izod impact strength-IS 1598 for brass,manganesebronzeor aluminium bronze, aluminium silicon bronze)	-
6.1.1.1 (Design Criteria-In case of Liquefiable gases-(see IS 8775, IS 8866 and IS 8867).)	-
6.1.12 -Table 1 ( Design Criteria : Passage area of stem thread size)	-
9.1 - Table 7,8 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.4 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
10.1.1.1 (Hydrostatic test)	-
4.1 (Classification of valve:direct acting valves )	-
4.1 (Classification of valve:indirect acting valves)	-
4.2.1 (Types of Valve: Type A )	-
4.2.1 (Types of Valve:TypeB)	-
4.2.1 (Types of Valve:Type C)	-
5.3.1 (Tensile Strength- IS 1608)	-
6.1.12 -Table 1 ( Design Criteria : Passage area of stem thread size)	-
5.3.1 (Elongation- IS 1608)	-
7.2.2 (The bursting pressure range of the bursting discs fitted to CO2 cylinders)	-
9.3.1 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.2 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.3 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.5 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
10.1.1.6 (Stress corrosion test for copper alloy valve bodies)	-

Partial

-
-

197

IS 3196 : Part 2 (2006)

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Material)	-
16 (Pneumatic Leakage Test)	-
14 (Water Capacity)	-
18 (a)Parent metal Longitudinal specimen)	-
18 (a)Parent metal Circumferential specimen)	-
18 (c)Weld Joint test specimen)	-
18.1.3 (Root Bend test,)	-
18.1.3 (Face Bend Test,)	-
18.1.5 (Minimum Thickness test)	-
22.2 (Outside surface)	-
10 (Foot Ring)	-

Partial

-
-

198

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Sudden Load Applied)	-
Cl 15 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-

Partial

-
-

199

IS 2871 (2012)

Branch pipe, universal for fire fighting purpose - Specification (Second Revision)

- View breakup
Rs.2200/- (excl. operational test) and Material testing charges as per respective Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Shape & Dimensions)	-
Cl 6.1 (Hydraulic Test)	-
Cl 6.2 (Operational Test)	-

Complete

-
-

200

IS 2415 (2015)

Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision)

- View breakup
Rs 14270/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,3.4, Annex A & Table 2. ( Flat Length )	-
5.1,3.5, Annex A & Table 2. (Flat Width)	-
5.2, Annex A (Thickness)	-
5.2.1 (Uniformity of Thickness)	-
6.1,Table 3 (i)Tensile strength:)	-
6.1,Table 3 (ii)Elongation at break )	-
6.3 (a) ( Ageing Test:- Tensile strength :)	-
6.3(b) ( Ageing Test :- Elongation at break)	-
6.4.1 (Joint Adhesion Strength)	-
6.4.3 ( Strength of splice on moulded tube)	-

Partial

-
-

201

IS 1971 (1996)

Crop protection equipment - Hand - Operated stirrup - Specifation (Fifth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Discharge rate)	-
Cl 6.2 (Volumetric Efficiency)	-
Cl 6.3 (Endurance)	-
Cl 7.1 (Height)	-
Cl 7.2 (Total Mass)	-
Cl 7.3 (Pump Cylinder)	-
Cl 7.4 (Piston)	-
Cl 7.5 (Piston rod)	-
Cl 7.6 (handle)	-
Cl 7.9 (Stirrup & Foot Resr)	-
Cl 7.13.1 (Delivery Hose)	-
Cl 7.13.3 (cut Off device & Lance)	-
Cl 7.13.4 (Nozzle)	-

Partial

-
-

202

IS 1970 (1995)

Cropprotection equipment - Hand - Operated compression - knapsack sprayer - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Tank & Skirt)	-
Cl 6.2 (Strap)	-
Cl 6.1 (Tank & Skirt)	-
Cl 6.3 (Filler Ring)	-
Cl 6.4 (Pump Cylinder)	-
Cl 6.5 (Piston)	-
Cl 6.7 (Handle)	-
Cl 6.8 (Valve Assembly)	-
Cl 6.9 (Delivery pipe)	-
Cl 6.13 (Delivery Hose)	-
Cl 6.15 (Nozzle)	-
Cl 6.14 (cut Off device & Lance)	-
Cl 6.17 (Height)	-
Cl 6.18 (Mass)	-
Cl 6.19 (Endurance)	-

Partial

-
-

203

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (UTM)	-
Cl 7 (Bending To Both Side At 90°, Then Straight)	-
Cl 10 (Width & Thickness)	-

Partial

-
-

204

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.i) (Mass of Galvanized coating )	-
10.ii) ( Uniformity of Galvanized coating-IS 2633)	-
6.1 (Tensile Strength - IS 14329)	-
6.1 (Elongation - Is 14329)	-
7.2- Table 2 (Wall thickness of fittings - IS 1879)	-
7.5 - Table 2 (Projection of Rainforcement - IS 1879)	-
7.5 - Table 3 (Width of Rainforcement - IS 1879)	-
11 (Pressure Test)	-
12 (Compression Test)	-

Partial

-
-

205

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
7.4 (SusceptibiIity to Environmental Stress Cracking)	-
7.3 (Tensile Test)	-
5 and Table 1 (DIMENSIONS OF PIPES - outside diameters)	-
5 and Table 1 (DIMENSIONS OF PIPES - wall thickness shall)	-
7.2 (Reversion Test)	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-
6.1 (Visual Appearance)	-
3.1 (Class of Pipe)	-

Partial

-
-

206

IS 1825 (1983)

Specification for aluminium alloy milk cans (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (h) Mass 6.5 Kg. Min.)	-
2 (Capacity)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Drain Holes )	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Hole Dia 8 ,2 holes)	-
4 Fig. 1 (Hole Dia 12, 3 holes)	-
5 (i) If the thickness at shoulder is less than 2.5 mm a )	-
5 (reinforcement ring of 2 mm thickness shall be provided.)	-
5 (ii) Brinell Hardness 85 HB Min.)	-
7 (i) Air Pressure Test (Cl 7.1))	-
7 (ii) Drop Test (Cl 7.2))	-
7 (iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-

Partial

-
-

207

IS 5504 (1997)

Specification for spiral welded pipes (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon)	-
Cl. 5.1 (Phosphorus)	-
Cl. 5.1 (Sulphur)	-
6.1 (Tensile Test)	-
6.2 (Flattening Test)	-
6.3/6.3.1.1 (Submerged Arc Weld Test- Guided bend test)	-
8.1 (Length)	-
8.2 (Dimensions)	-

Complete

-
-

208

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 5.1.2 (Weight)	-
Cl 6.1 (Tensile Test On UTM)	-
Cl 6.2 (Tensile Test On UTM)	-
Cl 6.3 (Tensile Test On UTM)	-
Cl 5.1 (Diameter)	-
Cl 5.1.2 (Weight)	-
3.1.1 (PHOSPHORUS)	-
3.1.1 (SULPHUR)	-
3.1.1 (PHOSPHORUS)	-
3.1.1 (SULPHUR)	-

Partial

-
-

209

IS 1785 : Part 1 (1983)

Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1 (Tensile Test On UTM)	-
Cl 6.2 (Tensile Test On UTM)	-
Cl 6.4 (Tensile Test On UTM)	-
Clause 3.1.1 (Phosphorus)	-
Clause 3.1.1 (Sulphur)	-

Partial

-
-

210

IS 1784 (2020)

Screwed Closures for Drums — Specification ( Fourth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Dimensions-Steel flange- d1)	-
6 (Dimensions-Steel flange- d2)	-
6 (Dimensions-Steel flange- d4)	-
6 (Dimensions-Steel flange- h1)	-
6 (Dimensions-Steel flange- t1)	-
6 (Dimensions-Flange Gasket- wd)	-
6 (Dimensions-Flange Gasket-wt)	-
6 (Dimensions-Steel Bung- d1)	-
6 (Dimensions-Steel Bung- p1)	-
6 (Dimensions-Steel Bung- p3)	-
6 (Dimensions-Bung Gasket- wt)	-
6 (Dimensions-Capseals- d1)	-
6 (Dimensions-Capseals- d2)	-
6 (Dimensions-Capseals- w1)	-
6 (Dimensions-Capseals- h2)	-
6 (Dimensions-Tag Ring- d1)	-
6 (Dimensions-Tag Ring- d2)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d3)	-
8.4 (Curling Test for Flanges)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d3)	-
8.4 (Curling Test for Flanges)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d3)	-
8.4 (Curling Test for Flanges)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d3)	-
8.4 (Curling Test for Flanges)	-

Partial

-
-

First
Prev
6
7
8
9
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Western Regional Office Laboratory (WROL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL OFFICE LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- [email protected]

Scope List