BIS - LIMS (Laboratory Information Management System)

ESKAPS (INDIA) PRIVATE LIMITED

13 N/P, Chowringhee Mansion, 30, Jawaharlal Nehru Road., KOLKATA, Kolkata, West Bengal, 700016

9830921133 [email protected]

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

Surgical Face Mask with Class 1,2,3

4550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Materials and Construction)	-	250	18% GST Extra
4.1.2(Design)	-	300	18% GST Extra
4.2 Table 1 ii)(Differential Pressure)	-	1500	18% GST Extra
4.2 Table 1 iii)(Splash Resistance)	-	2500	18% GST Extra

Complete

08 Jul, 2021

-
-

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

Single Use

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture - IS 17423)	-	100	18% GST Extra
4.1.1(Manufacture - IS 17423)	-	100	18% GST Extra
4.1.1(Manufacture - IS 17423)	-	100	18% GST Extra
4.2(Manufacture - IS 17423)	-	100	18% GST Extra
4.2(Manufacture - IS 17423)	-	100	18% GST Extra
4.2(Manufacture - IS 17423)	-	100	18% GST Extra
4.3(Manufacture - IS 17423)	-	100	18% GST Extra
4.3(Manufacture - IS 17423)	-	100	18% GST Extra
4.4(Manufacture - IS 17423)	-	100	18% GST Extra
4.4(Manufacture - IS 17423)	-	100	18% GST Extra
4.5(Manufacture - IS 17423)	-	100	18% GST Extra
4.6(Manufacture - IS 17423)	-	100	18% GST Extra
5.1(Workmanship and Finish - IS 17423)	-	200	18% GST Extra
5.1(Workmanship and Finish - IS 17423)	-	200	18% GST Extra
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	500	18% GST Extra
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	500	18% GST Extra
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	500	18% GST Extra
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-	500	18% GST Extra
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	500	18% GST Extra
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-	500	18% GST Extra

Complete

08 Jul, 2021

-
-

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

50 Kg Capacity

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.1(MANUFACTURE)	-	500	18% GST Extra
4-4.2(Manufacture)	-	300	18% GST Extra
4-4.3(Manufacture-Safety Stitch )	-	300	18% GST Extra
4-4.4(Manufacture-Hemming at the Mouth )	-	200	18% GST Extra
4-4.5(Manufacture- Freedom from Defects )	-	800	18% GST Extra
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	300	18% GST Extra
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	300	18% GST Extra
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	200	18% GST Extra
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	200	18% GST Extra
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	18% GST Extra
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	1000	18% GST Extra
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	800	18% GST Extra
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	350	18% GST Extra
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	800	18% GST Extra
5-5.2-Table 2-Sr. No.i)(SPECIFIC REQUIREMENTS-Cl. 8.9 of IS 9113 Total number of bags per bale (see Note 1) 500 )	-	350	18% GST Extra
5-5.2-Table 2-Sr. No.ii)(SPECIFIC REQUIREMENTS- Total number of bags per bale (see Note 1) 25)	-	350	18% GST Extra
5-5.2-Table 2-Sr. No.iii)(SPECIFIC REQUIREMENTS- Contract mass of a bale, kg (see Note 2) 332.5)	-	500	18% GST Extra
5-5.2-Table 2-Sr. No.iv)(SPECIFIC REQUIREMENTS- Cl. 8.1 of IS 9113 Corrected net mass of a bale, kg)	-	500	18% GST Extra
5-5.2-Table 2-Sr. No.v)(SPECIFIC REQUIREMENTS- Visual Number of joined bags per bundle of 25 bags )	-	350	18% GST Extra
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	350	18% GST Extra
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. iii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- pH of aqueous extract , mg/kg (ppm) max. limit , 6.0-7.0)	-	0	NA
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	NA
5-5.4-5.4.1-5.4.1.2(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	NA
5-5.4-5.4.1-5.4.1.3(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	NA
5-5.4-5.4.1-5.4.1.4(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	NA
5-5.4-5.4.1-5.4.1.5(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	NA
5-5.4-5.4.1-5.4.1.6(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	NA

Complete

08 Jul, 2021

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

50 kg Foodgrains Packing Bag

20600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	300	18% GST Extra
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	18% GST Extra
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	650	18% GST Extra
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	500	18% GST Extra
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	800	18% GST Extra
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	1200	18% GST Extra
3.2(Unlaminated Fabric Mass )	-	600	18% GST Extra
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	600	18% GST Extra
3.3.1(Bottom seam (IS 10789))	-	650	18% GST Extra
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	800	18% GST Extra
4.2 and Table 1 ii(Dimensions )	-	200	18% GST Extra
5.2 and Table 1 iii(Ends per dm )	-	100	18% GST Extra
5.2 and Table 1 iv(Picks per dm )	-	100	18% GST Extra
4.2 and Table 1 v(Mass of sack )	-	300	18% GST Extra
4.2 and Table 1 vi(Average breaking strength of fabric )	-	800	18% GST Extra
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	500	18% GST Extra
4.2 and Table 1 viii(Elongation at break of fabric )	-	800	18% GST Extra
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10600	18% GST Extra
4.2 and Table 1 x(Ash content )	-	600	18% GST Extra

Complete

08 Jul, 2021

-
-

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

Type A and B, 50 kg Foodgrain Packing Bag

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Manufacture- IS16186)	-	0	NA
4.1(Fabric)	-	200	18% GST Extra
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	200	18% GST Extra
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	500	18% GST Extra
4.2(Seam-IS 9113 (Cl.5.1.2))	-	300	18% GST Extra
4.2.i)( Type of stitches Herakle )	-	200	18% GST Extra3
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	200	18% GST Extra
4.2.iii)( Stitches/dm 10 ± 1 )	-	300	18% GST Extra
4.2.iv)(Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-	500	18% GST Extra
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	200	18% GST Extra
4.3.i)( Stitches/dm 10 ± 1 )	-	300	18% GST Extra
4.3.ii)(Tex of jute twine )	-	500	18% GST Extra
4.3( 310 tex.X 2-ply )	-	500	18% GST Extra
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	200	18% GST Extra
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	300	18% GST Extra
4.5(Freedom from defects)	-	500	18% GST Extra
4.5, Annex A(GAW)	-	100	18% GST Extra
4.5, Annex A(Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-	100	18% GST Extra
4.5, Annex A(Multiple broken weft(pick))	-	100	18% GST Extra
4.5, Annex A(Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-	100	18% GST Extra
4.5, Annex A(Float-Fabric where warp and weft yarns escape)	-	100	18% GST Extra
4.5, Annex A(Gap stitching-Stitching missing)	-	100	18% GST Extra
4.5, Annex A(Corner gap-Hole formation due to improper stitching at the corner of the bag )	-	100	18% GST Extra
4.5, Annex A(Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-	100	18% GST Extra
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	200	18% GST Extra
4.1 & 5.1, Table 1(Outside Length, cm )	-	100	18% GST Extra
4.1 & 5.1, Table 1(Outside Width, cm )	-	100	18% GST Extra
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	100	18% GST Extra
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	100	18% GST Extra
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	500	18% GST Extra
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	800	18% GST Extra
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	0	NA
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	0	NA
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	600	18% GST Extra
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	200	18% GST Extra
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	600	18% GST Extra

Complete

08 Jul, 2021

-
-

IS 1912 (1984)

Specification for country jute twine (second revision)

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2 / 2.1(MANUFACTURE / Jute Fibre —)	-	350	18% GST Extra
2.2(Yarn)	-	350	18% GST Extra
2.3(Twine)	-	500	18% GST Extra
2.4(Skein)	-	300	18% GST Extra
2.5(Lubricating Material)	-	800	18% GST Extra
2.6(Moisture Regain)	-	300	18% GST Extra
2.7(Contract Moisture regain)	-	300	18% GST Extra
3 / 3.1(REQUIREMENTS, table -1)	-	500	18% GST Extra
3 / 3.1(REQUIREMENTS, table -1)	-	1550	Ply of Yarn - Rs. 200/- Twist of Yarn - Rs. 350/- Breaking Load - Rs. 1000/- 18% GST Extra

Complete

08 Jul, 2021

-
-

IS 2573 (1986)

Specification for leather gauntlets and mittens (Second Revision)

Type 1, 2, 3

37150 View breakup
Rs.37150/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1 Fig. 1 to 3.(The three types shall be made to the shape and design as shown in Fig. 1 to 3.)	-	200	18% GST Extra
Cl 4.2.1, Table 1, Sr. No. 1(Solvent extractable substances)	-	500	18% GST Extra
Cl 4.2.1, Table 1, Sr. No. 2(Chromium content, (as Cr₂O₃))	-	650	18% GST Extra
Cl 4.2.1, Table 1, Sr. No. 3(pH of aqueous extract)	-	300	18% GST Extra
LP 8 Of IS 5914-1970(iv )Double hole stitch tear strength,kg/cm, Min)	-	600	18% GST Extra
LP 10 IS 5914-1970(v) Shrinking temperature deg C)	-	300	18% GST Extra
Cl .4.2.1( Leather - Chrome tanned/ chrome retanned full grain leather or flesh splits manufactured from cow or buffalo hides conforming to the following requirements shall be used a) The leather and flesh split shall have thickness of 1.0 to 1.5 mm;)	-	200	18% GST Extra
Cl .4.2.1(b) It shall be soft, pliable and free from flaws and loose fibres;)	-	200	18% GST Extra
Cl .4.2.1(c)It shall be treated so as not to obscure defects and shall not be stained with compounds of iron;)	-	200	18% GST Extra
Cl .4.2.1(d) In case of grain leather, it shall not crack on the grain side when bent grain outwards round a mandrel of 1.5 mm diameter through an angle of 180 degrees;)	-	200	18% GST Extra
Cl .4.2.1(e)The leather shall not containt any chromate extractable by water or dilute acids;)	-	200	18% GST Extra
Cl .4.2.1(g ) For the hand part and the inner face of the cuff, the leather and flesh split shall be of natural colour. The outer face of the cuff and strengthening pieces may be printed and shall be of natural shade or dyed to any shade as agreed to between the buyer and the supplier;)	-	200	18% GST Extra
Cl .4.2.1(h) The flesh side of leather shall be well buffed for type 2 and type 3)	-	200	18% GST Extra
Cl 4.2.2(Cotton ,Polyamide cotton core spun or any other suitable thread shall be used. core spun or any other For Type 1 material, the thread used shall comply with the requirements given in co1 3 of Table 2. For Type 2 and Type 3 materials, the thread shall comply with the requirements given in co1 4 of Table 2. )	-	200	18% GST Extra
Cl.4.2.2, Table 2 IS 1670-1970(i) Length, m/kg, )	-	100	18% GST Extra
Cl.4.2.2, Table 2 IS 1670-1970(ii) Single thread breaking load, Newtons,N)	-	500	18% GST Extra
Cl.4.2.3, Table 3( Canvas - Cotton canvasj undyed, with the constructional particulars given in Table 3)	-	200	18% GST Extra
Cl.4.2.3, Table 3(ii)Count of yarns ( approximate) wrap )	-	200	18% GST Extra
Cl.4.2.3, Table 3(ii)Count of yarns ( approximate) weft )	-	200	18% GST Extra
Cl.4.2.3, Table 3 IS 1963(iii)Ends/ cm)	-	100	18% GST Extra
Cl.4.2.3, Table 3 IS 1963(iv)Picks/cm)	-	100	18% GST Extra
Cl.4.2.3, Table 3 IS 1964(v)Mass, g/m2)	-	500	18% GST Extra
Cl.4.2.3, Table 3(vi)Breaking load on 5 x 20 cm ravelled strips, wrapway)	-	300	18% GST Extra
Cl.4.2.3, Table 3(vi)Breaking load on 5 x 20 cm ravelled strips, weftway)	-	300	18% GST Extra
Cl.4.3.1.1(The dimensions are shown in Fig. 1 with tolerances as given in 4.1.1.)	-	300	18% GST Extra
Cl.4.3.1.2( The hand part shall be cut from the piece of undyed leather and back portion including second, third and fourth fingers from different pieces of undyed leather.)	-	300	18% GST Extra
Cl. 4.3.1.3( The three different pieces of back portion shall be assembled and stitched together along the edges by a row of stitches. The back thus formed shall be secured with the corresponding front pieces ( palm side ) of the fingers with a row of stitches. The thumb shall be made from two pieces of undyed leather and closed with the hand part by a seam. The seam of the thumb shall be reinforced by a strip of leather and secured by two rows of stitches.)	-	500	18% GST Extra
Cl 4.3.1.4( The hand part shall be made with the flesh side up and the grain side to remain in contact with the hand.)	-	200	18% GST Extra
Cl.4.3.1.5( The cuff portion shall be made from two pieces of leather, the inner portion being of leather, chrome tanned, natural colour and the outer portion made of chrome tanned leather, with grain side out.)	-	300	18% GST Extra
Cl.4.3.1.6( Two pieces of leather shall be seemed together by a single row of stitches on the finger side and two rows of stitches on the thumb side. The cuff part thus formed shall be secured with the hand part by two rows of stitches.)	-	300	18% GST Extra
Cl.4.3.1.7( A dyed leather piece cut to the shape of a semi-circle shall be stitched on the inner part of the cuff along the joint of the hand and the cuff portions by a single row of stitches as shown in Fig. 1. The semi-circular piece of leather shall be not less than 75 mm in diameter.)	-	300	18% GST Extra
Cl.4.3.1.8( The gauntlets shall be machine stitched.)	-	100	18% GST Extra
Cl.4.3.1.9( The number of stitches for all the stitchings shall be 6 to 8 stitches per 25)	-	100	18% GST Extra
Cl.4.3.1.10(All losse ends of stitching threads shall be securely fastened)	-	200	18% GST Extra
Cl.4.3.2.11( The number of stitches for all the stitchings shall be 6 to 8 stitches per 25 mm. All loose ends of stitching threads shall be securely fastened.)	-	200	18% GST Extra
Cl.4.3.3.1 Type 3( The dimensions of mittens have been shown in Fig. 3 with tolerances as given in 4.1.1. Other sizes of cuff length, if required, shall be subject to agreement between the purchaser and the supplier.)	-	250	18% GST Extra
Cl.4.3.3.2( The palm including the inner component of the compartment for the four fingers shall be cut from one piece of leather and the thumb from a separate piece.)	-	250	18% GST Extra
Cl.4.3.3.3( The leather components shall be assembled with the flesh side out, the grain side being inside.)	-	300	18% GST Extra
Cl.4.3.3.4( The back portion including the outer component of the compartment for the four fingers shall be cut from one piece of canvas.)	-	200	18% GST Extra
Cl.4.3.3.5( The thumb shall be made with the two sides placed inside and stitched with a row of stitches. The thumb thus formed shall be attached to the palm through the cut hole and secured by two rows of stitches.)	-	200	18% GST Extra
Cl.4.3.3.6 (The joint at the palm and the thumb shall be reinforced by the same leather material and stitched by two rows of stitches as shown in Fig. 3.)	-	200	18% GST Extra
Cl.4.3.3.7( The back portion made of canvas shall be secured with the corresponding palm piece made of leather by two rows of stitches with the edges of both the leather and canvas placed inside.)	-	200	18% GST Extra
Cl.4.3.3.8( The entire palm portion may be lined with canvas of the same quality as used for the back, if required by the purchaser.)	-	200	18% GST Extra
Cl.4.3.3.9(The reinforcement piece shall be placed flesh side out and secured by four rows of stitches.)	-	200	18% GST Extra
Cl.4.3.3.10 (The cuff portion shall be made from one piece of canvas, the side edges being stitched together with two rows of stitches with the ends placed inside.)	-	250	18% GST Extra
Cl.4.3.3.11( The cuff thus formed shall be secured to the hand part by two rows of stitches all along their edges and turned over subsequently.The bottom edges of the cuff shall be hemmed. 6.0 mm with the raw edge properly,turned in.)	-	250	18% GST Extra
Cl.4.3.3.12( The mittens shall be machine stitched.)	-	100	18% GST Extra
Cl.4.3.3.13( The number of stitches for all stitchings shall be 6 to 8 stitches per 25 mm)	-	100	18% GST Extra
Cl.4.3.3.14( All loose ends of stitching threads shall be securely fastened.)	-	200	18% GST Extra
Cl.4.3.3.15(workmanship and finish, and in all other respects not defined in this standard, the mittens shall conform to the approved sample.)	-	200	18% GST Extra
Cl.4.3.2.1 type 2( The dimensions of leather gauntlets for workers in iron and steel industry have been shown in Fig. 2 with tolerances as given in 4.1.1. Other sizes of cuff length, if required, shall be subject to agreement between the purchaser and the supplier.)	-	300	18% GST Extra
Cl.4.3.2.2( The inner face of the gauntlets including the inner portion of index, second, third and fourth fingers shall be cut from one piece of leather. The thumb shall be cut from a separate piece of leather.)	-	300	18% GST Extra
Cl.4.3.2.3( The leather components shall be assembled with the flesh side up, the grain side being inside.)	-	350	18% GST Extra
Cl.4.3.2.4( The outer face of the gauntlets including index second, third and fourth fingers shall be cut from one piece of canvas.)	-	350	18% GST Extra
Cl.4.3.2.5( The thumb shall be made with the two cut sides placed together and stitched with one row of stitches. The thumb thus formed shall be attached to palm portion through the cut hole and secured by two rows of stitches as shown in Fig. 2.)	-	200	18% GST Extra
Cl.4.3.2.6( The joint at the palm and the thumb shall be reinforced with the same quality of leather as used for the inner face and stitched by two rows of stitches.)	-	200	18% GST Extra
Cl.4.3.2.7( The back portion made of canvas shall be secured with the corresponding palm piece made of leather by two rows of stitches with the edges of both leather and canvas placed inside.)	-	300	18% GST Extra
Cl.4.3.2.8( A leather strip, 20 mm wide and of the same quality of leather used for the inner face of the gauntlet, shall be used for reinforcing the face of canvas over the knuckles. The reinforcement piece shall be placed side up and secured by four rows of stitches.)	-	300	18% GST Extra
Cl.4.3.2.9( The cuff portion shall be made from one piece of canvas, the side edges being stitched together by double row of stitches with the ends placed inside. The cuff thus formed shall be secured to the hand part by two rows of stitches with the edges of the material placed inside. The bottom edge of the cuff shall be hemmed ( 6 mm ) with the row edges properly turned in.)	-	300	18% GST Extra
Cl.4.3.2.10( the gauntlets shall be machine stitched.)	-	200	18% GST Extra
Cl.4.3.2.12( Workmanship and finish, and in all other respects not defined in this standard, the gauntlets shall conform to the approved sample.)	-	300	18% GST Extra

Complete

08 Jul, 2021

-
-

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

Type - 100 kg, 93 kg and 75 kg

5650 View breakup
Rs.5650/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl4.2( IS 9113 )(HEMING AT THE MOUTH At the mouth of the bag, the raw edges of fabric shall be turned over first to a depth of minimum 18 mm and then to a depth of 20 mm minimum and the three layers of fabric thus formed shall be hemmed with jute yarns (see 5.1.2).)	-	200	18% GST Extra
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-	200	18% GST Extra
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113(For bags with selvedge at the mouth, the stitching of the raw edges of the bag shall be done after turning to a depth of 38 mm, with overhead or herakle stitches through four layers of the fabric ( see Fig. 2 ). The bottom of the bag shall be stiched at selvedge through two layers of the fabric with overhead or herakle stitch as the case may be ( see also IS 9113 :1993 ).)	-	200	18% GST Extra
Cl.4.4 (IS 19113)( Joined Bag The joining shall be done in such a manner that warp and weft shall run in the same direction.)	-	200	18% GST Extra
Cl.4.5( Freedom from Defects The bags should be generally free from weaving and sewing defects which effect the performance of the bag, such as holes, cuts, tears, floats, crushed selvedges, soots, stains, gap stitches, loose ends and frayed ends.)	-	300	18% GST Extra
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1.(i) Dimensions ( see Note ):)	-	200	18% GST Extra
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-	350	18% GST Extra
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Ends per dm)	-	200	18% GST Extra
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1.(Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-	800	18% GST Extra
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1.(Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-	200	18% GST Extra
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. i) Total number of bags per bale)	-	200	18% GST Extra
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. ii) Number of joined bags per bundle of 25 bags)	-	500	18% GST Extra
Cl.5.2 & Table 2. Cl 8.1 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Correct net mass of a bale)	-	300	18% GST Extra
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Picks per dm)	-	200	18% GST Extra
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. iv) Contract mass of a bale, kg)	-	350	18% GST Extra
Cl.5.2 & Table 2. Cl 8.2 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Moisture regain percent, Max)	-	650	18% GST Extra
Cl.5.2 & Table 2. IS 2969( The bales containing the bags shall conform to the requirements as laid down in Table 2. vi) Oil content on dry deoiled material basis, percent, Max)	-	600	18% GST Extra

Complete

08 Jul, 2021

-
-

IS 1943 (1995)

Textiles – A-twill jute bags (second revision)

A Twill

4650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sacking- IS 1943)	-	200	18% GST Extra
4.2(Seam -- IS 1943)	-	200	18% GST Extra
4.3(Safety Stitches -IS 1943)	-	200	18% GST Extra
4.4(Hemming at the mouth IS 9113)	-	200	18% GST Extra
4.5(Joined bag - IS 9113)	-	200	18% GST Extra
4.6(Freedom from defects- IS 1943)	-	500	18% GST Extra
4.1,5.1,Table 1(Dimension;Outside Length-IS 9113)	-	100	18% GST Extra
4.1,5.1,Table 1(Dimension;Outside width-IS 9113)	-	100	18% GST Extra
4.1,5.1,Table 1(Ends /dm -IS 1963)	-	100	18% GST Extra
4.1,5.1,Table 1(Picks/dm -IS 1963)	-	100	18% GST Extra
4.1,5.1,Table 1(Moisture Regain, Percent-IS 9113)	-	250	18% GST Extra
4.1,5.1,Table 1(Corrected Mass/Bag,g-IS 9113)	-	500	18% GST Extra
4.1,5.1,Table 1(Average Breaking Strength in N -IS 1969 N)	-	800	18% GST Extra
4.1,5.1,Table 1(Average breaking load of seam-IS 9030)	-	800	18% GST Extra
4.1,5.1,Table 1(Oil content, Percent-IS 2969)	-	600	18% GST Extra

Complete

08 Jul, 2021

-
-

Bureau of Indian Standards

The National Standards Body of India

ESKAPS (INDIA) PRIVATE LIMITED

13 N/P, Chowringhee Mansion, 30, Jawaharlal Nehru Road., KOLKATA, Kolkata, West Bengal, 700016

9830921133 [email protected]

Scope List